The consolidation of fiber-reinforced titanium matrix composite (TMC) monotapes produced by spray deposition is an important step in the manufacture of TMC components. The performance of this class of composites is controlled by fiber-matrix properties and by the composite’s relative density, fiber microbending stress/fracture and by the interfacial reaction layer thickness at the fiber-matrix ...

This paper presents a review plus new data that describes the role hierarchical nanostructural properties play in developing an understanding of the effect of scale on the material properties (chemical, elastic and electrical) of calcified tissues as well as the interfaces that form between such tissues and biomaterials. Both nanostructural and microstructural properties will be considered star...

in this study, friction stir spot welding (fssw) is applied to join the tial6v4 titanium alloy with 1.5 mm thickness and then the effect of rotational speed and tool dwell time on microstructure and mechanical properties is investigated. in this regard, the speed of the tool rotation was considered as 800, 1000, and 1200 rpm, as well as the tool dwell time was set at 7 and 12s. microstructural ...

Spark Plasma Sintering (SPS) is used to fabricate Titanium-Niobium-Zirconium-Tantalum alloy (TNZT) powder-based bioimplant components with controllable porosity. The developed densification maps show the effects of final SPS temperature, pressure, holding time, and initial particle size on final sample relative density. Correlations between the final sample density and mechanical properties of ...

A two-stage sintering practice was applied to W­3.99Ni­1.71Fe (mass%) to control its microstructural evolution and, accordingly, mechanical properties under high strain rates. Unlike the traditional one-stage liquid phase sintering, the alloy was first solid-state-sintered to close to full densification, and then liquid-phase-sintered by induction heating where the cooling rate was fast. With t...

The production of high strength steel components with desired properties by hot stamping (also called press hardening) requires a profound knowledge and control of the forming procedures. In this way, the final part properties become predictable and adjustable on the basis of the different process parameters and their interaction. In addition to parameters of conventional cold forming, thermal ...

Microstructural properties of materials, especially crystalline solids, are implicated in many of their properties. Vice versa, there are macroscopic environments which limit microstructural configurations. Certain iron/rare earth alloys, eg, TbDyFe2, display both a huge magnetostriction and frustration, i.e., minimum energy not achieved, in which microstructure plays an important, if puzzling,...

Since the bulk properties such as mechanical and functional properties of polycrystalline materials are strongly affected by microstructure, the control and optimization of the microstructure are essential to obtain desirable properties and to develop high performance polycrystalline materials. The application of external fields such as stress, electric and magnetic fields have been noticed as ...

The effect of repeated repair welding, shielded with argon, on microstructural properties, corrosion resistance, and dry sliding wear behavior of aluminum alloy 5083/H116 were investigated. Samples were welded by metal inert gas welding method. 100% argon was used to protect fusion zone. Aluminum alloy 5356 was used as the filler metal. The samples for microstructure, corrosion, and wear tests ...

Microstructure-sensitive design is performed using a newly developed Multiscale Complex Step Method. Algorithmic implementation of the complex-step method is based on conventional multiscale Taylor or FE2 direct model, with the difference being that the microstructural deformation gradient is modeled as a complex number with a small imaginary component. We introduce methods to calculate derivat...