in this paper the traditional covering plaster of masonry buildings is supplied with polypropylene and steel fiber to enhance their seismic behavior. the plaster mix proportion is determined by some initial mortar tests. also, one story, single span masonry building specimen plastered with different mortars is tested on a shaking table 8 times under a seismic input and the performance of the sp...

The purpose of this research was to experimentally characterize the flexural and tensile characteristics of fiber-reinforced Very High-Strength Concrete (VHSC) panels. The panels were made with a unique mix of cementitous materials achieving compressive strength of 26,000 psi (180 MPa) or greater. VHSC panels were reinforced with polypropylene fibers of 1 inch (25.4 mm) in length and Polyvinyl ...

the sustainability of the built environment is increasingly coming to the forefront of infrastructure design and maintenance decisions. to address this, development of a new class of more sustainable cement-based materials is needed. fiber reinforced self-consolidating mortar (frscm) was developed by optimizing the micromechanical parameters, which control composite properties in the hardened s...

In this paper, the effect of Polypropylene Fibers added to concrete on strength and thermal resistance of high strength concrete has been investigated. Therefore, five tests have been carried out to reach this goal which it includes; effect of weight percent of polypropylene fibers on mechanical properties of concrete, effect of fiber’s length on the strength of high strength concrete, effect o...

the total coal and lignite consumption of the thermic power plants in turkey is approximately 55 million tons and nearly 15 million tons of fly ash is produced. the remarkable increase in the production of fly ash and its disposal in an environmentally friendly manner is increasingly becoming a matter of global concern. studies for the utilization of fly ash in turkey are necessary to reduce en...

This work investigates the feasibility of using recycled high density polyethylene (rHDPE), recycled polypropylene (rPP) and old newsprint fiber (ONP) to manufacture fiber reinforced composites. The boards were made through air-forming and hot press. The effects of the fiber loading and coupling agent content on tensile, flexural, internal bond properties and water absorption and thickness swel...

Abstract The purpose of this research is to understand the transient fiber orientation and the associated rheology of long glass fiber (> 1mm) reinforced polypropylene, in a well-defined simple shear flow, to extend the results and knowledge gained from these fundamental experiments to the use of simulating (more complex) molding processes. Specifically, we are interested in associating the rhe...

in this paper, the effect of polypropylene fibers added to concrete on strength and thermal resistance of high strength concrete has been investigated. therefore, five tests have been carried out to reach this goal which it includes; effect of weight percent of polypropylene fibers on mechanical properties of concrete, effect of fiber’s length on the strength of high strength concrete, effect o...

The mechanical properties of newly developed aspen fiber–polypropylene composites (APC) were experimentally explored and numerically predicted at the temperatures and humidity that are typical for domestic housing applications. The mechanical properties of APCs with five different fiber-loadings were evaluated at the room temperature, 4 �C, and 40 �C. Environmental effects on the mechanical pro...

Melt spinning of polypropylene fibers containing silver and zinc nanoparticles was investigated. The nanometals were generally uniformly dispersed in polypropylene, but aggregation of these materials was observed on fiber surface and in fiber cross-sections. The mechanical properties of the resulted composite fibers with low concentration of nanometal were comparable to those for the control P...