Poly(HEMA) cryogel disks were synthesized by free radical polymerization of 2-hydroxyethylmethacrylate (HEMA), and then Cibacron Blue F3GA (CB), Reactive Green 19 (RG) and Congo Red (CR) were immobilized as dye ligands. Disks were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and swelling degree, porosity calculations. Cd2+ adsorption experi...

In this study, organobentonites were prepared by modification of bentonite with various cationic surfactants, and were used to remove As(V) and As(III) from aqueous solution. The results showed that the adsorption capacities of bentonite modified with octadecyl benzyl dimethyl ammonium (SMB3) were 0.288 mg/g for As(V) and 0.102 mg/g for As(III), which were much higher compared to 0.043 and 0.03...

Adsorption of reactive orange 16 by quaternary chitosan salt (QCS) was used as a model to demonstrate the removal of reactive dyes from textile effluents. The polymer was characterized by infrared (IR), energy dispersive X-ray spectrometry (EDXS) analyses and amount of quaternary ammonium groups. The adsorption experiments were conducted at different pH values and initial dye concentrations. Ad...

This study selected solid wastes, such as rice husk ash (RHA), inactive Saccharomyces cerevisiae powder (ISP), and rice husk (RH), as the potential adsorbents for the removal of Fe(II) and Mn(II) in aqueous solution. The structural characteristics, functional groups, and elemental compositions were determined by scanning electron microscope (SEM) and Fourier translation infrared spectrum (FT-IR...

conclusions the study results showed that by increasing the initial dye concentration and contact time, the adsorption capacity increased, as well. moreover, the thermodynamic parameters (δh °, δg °, and δs °) revealed the endothermic sorption of rr-198 onto mwcnts. results the rr-198 absorption rates were 33.26 and 222.88 mg/g, respectively for 20, and 200 mg/l dye concentration, at ph of 3, 6...

The object of present study was to examine the adsorption potential of nanozeolite clinoptilolite (CP) for the removal of malachite green (MG) from aqueous phase in a batch equilibrium system. SEM, EDX, XRF, XRD and FT-IR techniques of characterization of zeolite were applied. The effects of initial pH solution, adsorbent dose, temperature, contact time and initial MG concentration on adsorptio...

The adsorption behavior of chlorendic acid (1, 4, 5, 6, 7, 7-hexachlorobicyclo-(2, 2, 1) -hept-5-ene-2, 3dicarboxylic acid) onto hydrophilic fumed TiO2 (P-25, Degussa) in aqueous suspension was investigated. Results indicate that chlorendic acid adsorbed strongly in short times (2-5 mins) onto TiO2. Adsorption data is consistent with LangmuirHinshelwood isotherm model for monolayer adsorption a...

Graphene oxide (GO) was produced from bare graphite (BGP) material and was used as an intrinsic adsorbent for the removal of malachite green (MG) from aqueous solution. In an optimization study, the effects of the initial concentration of MG, solution pH, adsorbent dosage, contact time and ionic strength were investigated in detail. The water-soluble dye was analyzed at a maximum wavelength of ...

expanded graphite nanosheets (eg-nanosheets) were used for adsorption of malachite green (mg) from aqueous solution. the influences of dye concentrations, absorbent dosage, ph values and the temperatures on the adsorption were investigated as well. the dye adsorption experiments were carried out by utilizing batch procedure. eg-nanosheets were initially characterized by scanning electron micros...

Adsorption of cellulase on solids resulting from pretreatment of poplar wood by ammonia fiber expansion (AFEX), ammonia recycled percolation (ARP), controlled pH, dilute acid (DA), flowthrough (FT), lime, and sulfur dioxide (SO(2)) and pure Avicel glucan was measured at 4 degrees C, as were adsorption and desorption of cellulase and adsorption of beta-glucosidase for lignin left after enzymatic...