As an important energy carrier in terms of carbon neutrality, green hydrogen produced by water electrolysis using renewable electricity has attracted worldwide attention. The polymer electrolyte electrolyzer (PEWE) the potential to be a mainstay market future because its superior performance. However, development PEWE is constrained slow progress membrane electrode assembly (MEA), which essenti...

To increase the efficiency of hydrogen production by proton exchange membrane water electrolyzers (PEMWEs), relationships between specific activity and stability membrane–electrode assembly (MEA) must be clarified. Ir oxide electrodeposited on Ti substrate is used as an oxygen electrode, its electronic properties electrochemical behavior in PEMWE operation are observed. The fabricated through a...

One of the most important parts of a polymer electrolyte membrane fuel cell (PEMFC) is the membrane electrode assembly (MEA). However, the delamination between the membrane and electrode layers, induced by uneven distribution of internal stress and stress concentration due to the inconsistent water and thermal expansion properties, greatly reduces the PEMFC durability. Based on the data from th...

the preparation of polymer membrane selective to iron(ii) ion and its application to ion-selectiveelectrode is reported here. pvc membrane contains iron–selective n-phenylaza-15-crown-5 asionophore. the membrane electrode is highly selective to iron(ii) ion and exhibit good linearresponse over a wide concentration range of 1.0 × 10-2 to 1.0 × 10-6 m with nernstian slope of29.2 ± 0.6 mv per deca...

Sulfonated polyether ether ketone (SPEEK) is categorized in a nonfluorinated aromatic hydrocarbon proton exchange membrane (PEM) group and considered as a suitable substitute for common per-fluorinated membranes, such as Nafion, due to wider operating temperature, less feed gas crossover, and lower cost. Since modeling results in a better understanding of a phenomenon, in this study a dynamic o...

Niobium was doped into anatase TiO2 support at 10 mol % Nb0.1Ti0.9O2 using sol-gel chemistry. A PtRu/Nb0.1Ti0.9O2 catalyst was synthesized by LiBH4 reduction in tetrahydrofuran. The methanol electro-oxidation activity of the catalyst shows that this oxide support was electrically conductive. The current A/gPt was 6% higher on the PtRu/Nb0.1Ti0.9O2 catalyst compared to a commercial PtRu/C cataly...

A full three-dimensional, single phase computational fluid dynamics model of a proton exchange membrane fuel cell (PEMFC) with both the gas distribution flow channels and the Membrane Electrode Assembly (MEA) has been developed. A single set of conservation equations which are valid for the flow channels, gas-diffusion electrodes, catalyst layers, and the membrane region are developed and numer...

a highly selective electrode for bromide ion based on aza pyrilium derivative as an excellentionophore is described.the sensor exhibits a good linear response with a slope of ( 60±1 ) mv per decadeover the concentration range of ( 1×10-3 – 9×10-6 m ) , and a detection limit of ( 3×10-6 m ) of bromideions .the electrode response is independent of ph in the range of(4.0 –9.5).selectivity coeffici...