This work examines the sorption capacity of a natural biomass collected from an irrigation pond. The biomass mainly consisted of a mixture of chlorophyte algae with caducipholic plants. Biosorption experiments were performed in monometallic and bimetallic solutions containing different metals commonly found in industrial effluents (Cd, Cu and Pb). The biosorption process was slightly slower in ...

An agricultural by-product waste: orange peel was tested for the removal of four acid dyes from aqueous solutions in batch conditions. As results obtained, kinetics of dyes sorption was time of contact, initial dyes concentration and dyes type dependent. The pseudo second-order reaction rate model adequately described the kinetics of dyes sorption with high correlation coefficients. Langmuir mo...

this paper discusses the biosorption of ni(ii) ions from aqueous solutions by bacillus sphaericus biomass. the biosorption process was affected by the solution ph, biomass concentration, contact time, temperature and initial ni(ii) concentration respectively. the sorption kinetics and equilibrium data were described well with the pseudo-second order kinetic model and the freundlich isotherm mod...

Cerium binding activity of three different water soluble pectin compounds of different origin was studied in a batch sorption system. The Langmuir, Freundlich and BET sorption models were adopted to describe the binding reactions between metal ions and pectin molecules. The Langmuir model provided the best fit. Within the pH range from 4.0 to 6.0, the largest amount of the cerium ions was bound...

We investigated the sorption of pentachlorophenol (PCP) to a surfactant-modified clay and the solubility of PCP as a function of pH and ionic strength. Pentachlorophenol is a hydrophobic ionizable organic compound; therefore, it can exist as either a protonated or adeprotonated species. The objectives of this study were to determine differences in the sorption and solubility of the two species ...

Batch sorption experiments were carried out to remove As(III) from aqueous solution by using iron based commercial adsorbent Bayoxide. The effects of various experimental parameters, such as initial concentration, contact time and solution pH on the adsorption of As(III) on adsorbent was investigated. The adsorption density increased with increased initial arsenic concentration and contact time...

The ability of two varieties (hard and soft) of almond peels, as inexpensive sorbents for the removal of bezanyl red (acid dye) from synthetic aqueous solutions has been studied. After their characterization by different techniques, (elemental analysis, biochemical analysis, IR spectroscopy, thermogravimetric analysis, scanning electron microscopy and mercury porosimetry), the dye sorption kine...

it seems using the maxwell-stefan (m-s) diffusion model in combination with the vacancy solutiontheory (vst) and the single-component adsorption data provides a superior, qualitative, andquantitative prediction of diffusion in zeolites. in the m-s formulation, thermodynamic factor (г) isan essential parameter which must be estimated by an adsorption isotherm. researchers usually utilizethe simp...

In this study, waste olive cake (OC) was utilized as the raw material for the production of biosorbents by chemical treatment and its adsorption capacity for zinc ion was evaluated. Tests were conducted with the total biomass (T) and with the fraction > 2.00 mm (P), in order to determinate the influence of this fractionation step on subsequent treatments. Two chemical agents were used: sulfuric...

in this study, cross linked chitosan resin (ccr) was prepared by cross linking chitosan with glutaraldehyde, and then î±-ketoglutaric acid-modified chitosan resin (kcr) was obtained by modifying ccr with î±-ketoglutaric acid. the sorption behavior of methylene blue (mb) on kcr and ccr from aqueous solution was investigated. the effect of various experimental parameters (e.g. initial ph, sorbent...