The following study demonstrates the possibility of producing different activated carbons from a mixture of waste tires and tubes. The mixture was pyrolyzed at different temperatures namely (400,450 and 500 о C) for two hours for the determination of best condition of heating. It was found through the study that semi carbonized marital produced via pyrolyis at 500 о C was the best; thus it was ...

In this study, pumice stone was used for the removal of tetracyline (TC) from aqueous solutions. It was characterized by XRD, FT-IR, SEM and BET analyses. Cation exchange capacity of pumice stone was found to be 9.9 meq/100 g. Effect of various parameters such as solution pH (2-11), adsorbent dosage (0.5-10 g/L), contact time (2.5-120 min), initial TC concentration (5-300 mg/L) and temperature ...

In continuation to our recent study on the synthesis and characterization of starch-silica nanocomposite, in the present study the nanocomposite has been evaluated for the removal of Cd(II) from the aqueous solution. The conditions for the sorption have been optimized and kinetic and thermodynamic studies were performed to understand the adsorption behaviour of the composite. Though the cadmium...

Activated carbon prepared form coconut residues (CORC), and agricultural waste byproduct obtained after oil extraction was used for the adsorption of Ni(II) form aqueous solution. The process of uptake obeys both Freundlich and Langmuir adsorption isotherms. Kinetic studies indicate that it obeys Lagergram kinetic model. Quantitative removal of Ni(II) from 100mL aqueous solution containing 10mg...

Sawdust is obtained from naturally and easily available which is biodegradable. The bio sorption capacity of the sawdust for hexavalent chromium was studied at different solution pH values (1.5-6), initial metal concentration (50450 mg/L), adsorbent dose (1-7 g/L). The maximum adsorption of Cr (VI) is obtained at pH 1.5, initial concentration 50 ppm and adsorbent dose 5 g/l. The adsorption of c...

Parameters from single-component isotherm models were used in multicomponent isotherm models to predict the aqueous phase sorption of trichloroethylene (TCE) in the presence of tetrachloroethylene (PCE) in four zeolites, Tenax, and three natural solids. The Langmuir, the Polanyi-Dubinin, and the Freundlich or the Langmuir-Freundlich isotherm models were used to simulate single-component sorptio...

Activated carbon prepared from coir pith (ZnCPC) using ZnCl2 was investigated to find the feasibility of its application for removal of 2,4–dichlorophenol (2,4-DCP) in aqueous solution through adsorption process. Batch mode kinetics and isotherm studies were carried out to evaluate the effects of contact time, initial concentration, adsorbent dose, pH, and temperature. Lagergren, Second order, ...

The efficiency of activated parthenium hysterophorous as an adsorbent for removing Pesticide mixture from water has been studied. Batch mode adsorption experiments have been conducted by varying pH, concentration, adsorbent dose and contact time. Pesticide removal was pH-dependent and found to be maximum at pH 2.0. The maximum removal of pesticides was achieved within 100 min after the start of...

A monolithic carbon aerogel with a specific pore texture was used as benzene adsorbent. Adsorption was carried out under static conditions at 25 C and at saturation, an adsorption capacity as high as 0.77 cm.g or 837 mg.g was obtained. This work is devoted to the application of carbon aerogels for the removal of hydroquinone, catechol and resorcinol from aqueous solutions. These materials were ...

in this study, nano-tio2 was employed for the adsorption of chloroform from aqueous solution in batch equilibrium experiments to investigate its adsorption properties. the effects of ph, initial chloroform concentration and nano-tio2 dosage were also investigated. optimal conditions for chloroform removal by nano-tio2 have been then identified. results of equilibrium experiments showed that the...