A laminated composite was produced using a thermoplastic prepreg by inserting an interleaved film with the same type of matrix as the prepreg during the lay-up process to improve the low interlaminar properties, which is a known weakness of laminated composites. Carbon fiber fabric (CFF) and polypropylene (PP) were used to manufacture the thermoplastic prepregs. Eight prepregs were used to prod...

a new method for determination of residual stresses in the bottom layers of laminated composites is developed. in this method the residual stresses are determined by performing a consecutive drilling of laminated composites in the center of the rosette and recording the strains after drilling each layer. the depth of the hole in each step is equal to the thickness of each layer and the maximum ...

in this study, the free vibration of partially fluid-filled laminated composite circular cylindrical shell with arbitrary boundary conditions has been investigated by using rayleigh-ritz method. the analysis has been carried out with strain-displacement relations based on love’s thin shell theory and the contained fluid is assumed irrotational, incompressible and inviscid. after determining the...

In this article, free vibration analysis of variable stiffness composite laminate (VSCL) plates with flat and folded shapes is studied. In order to consider the concept of variable stiffness, in each layer of these composite laminated plates, the curvilinear fibers are used instead of straight fibers. The analysis is based on a semi-analytical finite strip method which follows classical laminat...

In this paper, free vibration analysis of carbon nanotube (CNT) reinforced laminated composite panels is presented. Three types of panels such as flat, concave and convex are considered for study. Numerical simulation is carried out using commercially available finite element analysis software ANSYS. Numerical homogenization is employed to calculate the effective elastic properties of randomly ...

In this research program, a numerical method was developed to predict the progressive failure of a thick laminated composite femoral component for total hip arthroplasty. A 3-D global/local technique was used to capture the overall structural response of this system while also enabling the 3-D ply level stress state to be determined efficiently and accurately. Different failure criteria and dif...

A NURBS-based isogeometric finite element formulation is developed and adopted to the free vibration analysis of finite square and skew laminated plates. Variable stiffness plies are assumed due to implementation of curvilinear fiberreinforcements. It is assumed due to employment of tow placement technology, in each ply of variable stiffness composite laminated plate the fiber reinforceme...

In this paper, natural frequencies of square laminated composite plates for different supports at edges are presented. Using a third order shear deformation theory of plates (TSDT), which is categorized in equivalent single layer theories (ESL), a new set of linear equations of motion for square multi-layered composite plates has been derived. Laminated plates are supposed to be either angleply...

An analytical model founded on geometric and potential energy principles for kink band deformation in laminated composite struts is presented. It is adapted from an earlier successful study on confined layered structures that was formulated to model kink band formation in the folding of geological layers. This study's principal aim was to explore the underlying mechanisms governing the kinking ...

A theory model was established to calculate the magnetoelectric voltage coefficient of piezoelectric/piezomagnetic laminated composites on silicon or magnesium oxide substrates. The magnetoelectric voltage coefficient is calculated as function of interface coupling factor k, volume ratio of piezoelectrics to piezomagnetic, and volume ratio of substrates to composite. It was found that the magne...