The levels of trace elements and polycyclic aromatic hydrocarbons (PAHs) in fly ash generated by coal combustion have received considerable attention in recent years, due to their potential environmental impact. Sixteen high priority PAHs and 14 trace elements in coal fly ash were measured. The particle sizes of fly ash showed a bimodal distribution, and most ash particles were within a range o...

Effect of respirable fly ash particles inhalation on lungs of rats was investigated by exposing them to respirable aerosols of size classified power plant fly ash at average concentrations of up to 14.4 +/- 1.77 mg/m3 for 4 hr/day for 28 consecutive days. A remarkable increase was found in blood eosinophil counts of fly ash exposed animals. Biochemical indicators of pulmonary damage viz. lactat...

Fly ash from power plants is very toxic because it contains heavy metals. In this study fly ash was treated with a thermal plasma. Before their treatment, the fly ash was analyzed by many technics such as X-ray fluorescence, CHN elemental analysis, inductively coupled plasma atomic emission spectroscopy and scanning electron microscopy. With these technics, the composition, the chemical and phy...

The management of Greenlandic municipal solid waste incineration (MSWI) fly ash could be improved. Presently, the fly ash is disposed of in Norway as the fly ash is classified as hazardous waste. Fly ash contains high amounts of leachable heavy metals, but also resources that could be beneficial for reuse. In electrodialytic remediation a direct current is applied to a contaminated particulate ...

A new iron-fly ash packing was studied for reductive transformation of p-nitrotoluene. The packing was made of iron, fly ash and kaolin with the mass ratio of 36:7:2. A reactor was designed to investigate the long-term performance of the packing. The results showed that the reduction of p-nitrotoluene increased with decreasing pH, because the reduction potential of reaction increased with the c...

Studies were performed to compare the physical and chemical characteristics and the in vitro macrophage cytotoxicity of oil and coal fly ash. Sampling methodology was developed to collect size-fractionated particulate matter from the smokestack of either a coal-fired or an oil-fired power plant. Morphological studies demonstrated particle heterogeneity, although most coal fly ash particles appe...

In the filling of polymer, coal fly ash has been limited in use by its unlovely grey color. In order to improve the qualities of coal fly ash from Huaneng Power international Incorporation Dezhou Power Plant, its meso-structure and influencing factors on whiteness have been tested and analyzed. Ca(OH)2-H2O-CO2 system to modify the fly ash is conducted. Round coating testify that the system can ...

Fly ash is a waste produced in coal-fired thermal power stations. It has pozzolanic properties and can therefore be stabilized to achieve higher strength and durability required for use as pavement substructure specifically as subbase or base layer material. The stabilization of fly ash can be achieved by adding either cement, lime or other materials. Stabilization of fly ash with available ind...

This study investigates the feasibility of co-firing fly ashes from different boilers, circulating fluidized beds (CFB) or stokers as a sustainable material in alkali activators for ground granulated blast-furnace slag (GGBS). The mixture ratio of GGBS and co-firing fly ashes is 1:1 by weight. The results indicate that only CF fly ash of CFB boilers can effectively stimulate the potential chara...

This investigation was performed to establish the effects of the source and amount of fly ash on abrasion resistance of concrete. A reference concrete was proportioned to have a 28day age strength of 41 MPa. Three sources of Class C fly ash were used in this research. From each source, three levels of fly ash to total cementitious materials content (40, 50, and 60%) were used in producing the c...