The chemical vapor deposition of polycrystalline carbon nitride in stagnation flow reactors is simulated. A model is used to predict the gas phase chemistry, temperature and velocity profiles, potential gaseous film growth precursors, and to evaluate the likelihood of bond rearrangement occurring in the bulk phase or on the deposition surface once the gaseous precursors are adsorbed. Numerical ...

chemical vapor deposition (cvd) is one of the most important methods for producing carbon nanotubes (cnts). in this research, a numerical model, based on finite volume method, is investigated. the applied method solves the conservation of mass, momentum, energy and species transport equations with aid of ideal gas law. using this model, the growth rate and thickness uniformity of produced cnts,...

The simultaneous removal of SO2/NO2 by limestone slurry was studied in a gas-liquid bubbling reactor. Experiments were carried out to find the effect of various operating parameters such as inlet concentration of SO2 and NO2, reaction temperature, O2 content in the flue gas and additive on the SO2 and NO2 removal efficiencies. SO2 removal efficiency decreased with inlet NO2 concentration, react...

The exhaust gases of gas turbine power plant carry a significant amount of thermal energy that is usually expelled to the atmosphere this causes a reduction in net work and efficiency of gas turbine. On the other hand, the generated power and efficiency of gas turbine plants depend largely on the temperature of the inlet air, So that they both increase as the inlet air temperature decreases. Th...

Performance of a gas turbine mainly depends on the inlet air temperature. The power output of a gas turbine depends on the flow of mass through it. This is precisely the reason why on hot days, when air is less dense, power output falls. The objective here is to assess the advanced systems applied in reducing the gas turbine intake air temperature and examine the merits from integration of the ...

Chemical Vapor Deposition (CVD) is one of the most important methods for producing Carbon Nanotubes (CNTs). In this research, a numerical model, based on finite volume method, is investigated. The applied method solves the conservation of mass, momentum, energy and species transport equations with aid of ideal gas law. Using this model, the growth rate and thickness uniformity of produced CNTs,...

comIn the present study, CO2 removal from natural gas stream has been studied using a flat sheet membrane contactor. A three dimensional mathematical model is developed to describe the process. The model considers the transport of a gas mixture containing carbon dioxide and methane through a flat sheet membrane contactor module. The model is based on the non-wetted mode of operation, in which t...

Dioxins in the combustion gas of municipal solid waste incinerators (MSWIs) are resynthesized when the combustion gas passes from the outlet exaust gas boiler to the outlet gas duct. The objective of the study was to estimate if the suppression of the formation of dioxins depends on the inlet gas temperature and diameter and/or temperature of droplet spray water using an actual incinerator oper...

Performance of a gas turbine is mainly depends on the inlet air temperature. The power output of a gas turbine depends on the mass flow rate of air. Now days the atmosphere temperature is hot, so the air is less density, the mass flow rate will reduce and automatically the power output will reduce. A reduce of 1°C temperature of inlet air increases the power output by approximately 0.7MW. To re...

The present work addresses unsteady flame dynamics in a lean-premixed swirl-stabilized combustor, with attention focused on the transition of flame structure from a stable to an unstable state. It was found that the inlet temperature and equivalence ratio are the two most important variables determining the stability characteristics of the combustor. A slight increase in the inlet mixture tempe...