نتایج جستجو برای: inert gas welding

تعداد نتایج: 266267  

2013
Sukhomay Pal Surjya K. Pal Arun K. Samantaray

Welding shrinkage and distortion affect the shape, dimensional accuracy and the strength of the finished product. This work concerns the prediction of welding distortion in a pulsed metal inert gas welding (PMIGW) process. Six different types of radial basis function network models have been developed to predict the distortion of welded plates. Six process parameters, namely pulse voltage, back...

In this experimental work, Manganese oxide (MnO2), Zinc oxide (ZnO), Iron oxide (Fe2O3) and Magnesium chloride (MgCl2) were used as activating flux to investigate the effects for SS 304 in tungsten inert gas (TIG) welding. Ultimate tensile strength, percentage elongation, Penetration depth and width were studied of material SS 304. The experimental results indicated that the MnO2 and Fe2O3 flux...

Journal: :International Journal of Advanced Robotic Systems 2023

This article studies the multi-layer and multi-pass welding of circumferential weld in thick pipe an aviation enterprise, based on static characteristics arc, through data calculations experiments to verify relationship between arc voltage length, proposes use controller accurately adjust real time, improve stability, torch wiggler expand fusion width, meet adaptive adjustment wide weld, build ...

2012
Martin Lehnert Beate Pesch Anne Lotz Johannes Pelzer Benjamin Kendzia Katarzyna Gawrych Evelyn Heinze Rainer Van Gelder Ewald Punkenburg Tobias Weiss Markus Mattenklott Jens-Uwe Hahn Carsten Möhlmann Markus Berges Andrea Hartwig Thomas Brüning

This investigation aims to explore determinants of exposure to particle size-specific welding fume. Area sampling of ultrafine particles (UFP) was performed at 33 worksites in parallel with the collection of respirable particles. Personal sampling of respirable and inhalable particles was carried out in the breathing zone of 241 welders. Median mass concentrations were 2.48 mg m(-3) for inhalab...

2005
Ho-Sung Lee Jong-Hoon Yoon Jae-Sung Park Yeong-Moo Yi

Currently many aerospace vehicle systems require lightweight, high performance pressurized tank for storage of propellant, nitrogen, oxygen, or other medium. Aircrafts have several needs for high-pressure stored gas, like aircraft escape slide inflation systems, emergency oxygen supply, landing gear actuator, engine pressurized air start system and on-board inert gas generating system nitrogen ...

2007
W. Zhou T. Z. Long C. K. Mark

Plates of 3–5 mm in thickness were extracted from an AZ91D ingot and then butt joints of the plates were produced using tungsten inert gas (TIG) welding method. The TIG arc was also used to deposit welding beads on some of the thin plates. No cracking was found in the butt joints. However, hot cracking was always observed to propagate from the heat affected zone (HAZ) under the welding bead int...

2017
Kuanfang He Qing Yang Dongming Xiao Xuejun Li

Abstract: The thermo-elastic fracture problem and equations are established for aluminium alloy Metal Inert Gas (MIG) welding, which include a moving heat source and a thermoelasticity equation with the initial and boundary conditions for a plate structure with a crack. The extended finite element method (XFEM) is implemented to solve the thermo-elastic fracture problem of a plate structure wit...

2016
Halshka Graczyk Nastassja Lewinski Jiayuan Zhao Nicolas Concha-Lozano Michael Riediker

Tungsten inert gas welding (TIG) represents one of the most widely used metal joining processes in industry. Its propensity to generate a greater portion of welding fume particles at the nanoscale poses a potential occupational health hazard for workers. However, current literature lacks comprehensive characterization of TIG welding fume particles. Even less is known about welding fumes generat...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید