Laser drilling is a well-established process in aerospace industry. However quality and geometry of holes do not get under control in an absolute way. Moreover, drilling understanding is complicated due to the number of parameters and physical phenomena. Laser and matter have some own parameters which are not constant with temperature, and so could not be fitted. In this paper, we describe the ...

In this paper, micro-hole drilling in ambient air is presented using fs fiber laser (750 fs & 1030 nm). Micro holes were fabricated in both transparent (glasses) and non-transparent materials (metals and tissues). Hole shape and morphology was characterized and evaluated with optical microscope and scanning electron microscopy (SEM). Debris-free micro holes with good roundness and no thermal da...

Micro-hole drilling and cutting in ambient air are presented by using a femtosecond fiber laser. At first, the micro-hole drilling was investigated in both transparent (glasses) and nontransparent (metals and tissues) materials. The shape and morphology of the holes were characterized and evaluated with optical and scanning electron microscopy. Debris-free micro-holes with good roundness and no...

all the producing and assembling processes exert residual stress on the pieces that may lead to structural failure. therefore, calculating the residual stress in such structures has been common in recent years. in this article, distribution of temperature and residual stress resulting from arc welding in three-pass butt joint in p91 austenitic stainless steel pipes is calculated and estimated u...

The accurate prediction of wellbore temperature distribution helps to accurately estimate well pressure profile and bottom-hole pressure (BHP) which is important in the under-balanced drilling (UBD) operation. In this paper effect of temperature variation due to heat transfer of drilling fluid with the formation and also oil and gas production from the reservoir into the annulus in under-balanc...

This paper presents a wellbore-stability study of the San Andreas Fault Observatory at Depth (SAFOD) research borehole located near Parkfield, California, USA. In the summer of 2005, the SAFOD borehole was drilled successfully through the active trace of the San Andreas Fault (SAF) in an area characterized by fault creep and frequent microearthquakes. In this study, we report how the analysis o...

This investigation proposes a grey-based Taguchi method to solve the multi-response problems. The grey-based Taguchi method is based on the Taguchi’s design of experimental method, and adopts grey relational analysis (GRA) to transfer multiresponse problems into single-response problems. In this investigation, an attempt has been made to optimize the drilling process parameters considering weig...

The study of rotary steering drilling technology is currently one of the hot topics in the drilling engineering field. It requires accurate well trajectory control instructions when rotary steerable tools are applied to achieve the well trajectory control goal. A drilling trajectory prediction model will benefit this progress. According to the continuous beam theory, a mechanical model of push-...

Hardened steels are commonly used in wide areas of technologies and industries. In respect of poor machinability of these steels and requirement of expensive cutting tools, study of machining economy is a matter of importance. Thus the present study deals with the economic considerations of various hole making processes. For this purpose, the hard steel samples were machined by conventional dri...

Hardened steels are commonly used in wide areas of technologies and industries. In respect of poor machinability of these steels and requirement of expensive cutting tools, study of machining economy is a matter of importance. Thus the present study deals with the economic considerations of various hole making processes. For this purpose, the hard steel samples were machined by conventional dri...