A process was developed for fabricating arrays of micro-channels in shape-memory NiTi for bone implant applications, with a tailorable internal architecture expected to improve biomechanical compatibility and osseointegration. Ni-51.4 at.% Ti with 24-34 vol.% porosity was fabricated by electrochemical dissolution of parallel layers of steel wire meshes embedded within a NiTi matrix during hot p...

The static strain aging is a phenomenon that can change the mechanical properties of low carbon steels. Thus, the static strain aging behavior of low carbon steel wires after drawing process is studied. To do so, the wires are austenitized at different temperatures and cooled in different rates. Then the wires are drawn and aged at a specific temperature and time. Before and after aging of each...

The welding heat input has a great influence on the weldments properties. This paper describes the influence of welding heat input on the weld metal toughness of high-carbon steel surface welded joint. The steel is surfaced with self-shielded wire, with three different heat inputs (6.5; 10.5 and 16 kJ/cm). Total impact energy, as well as crack initiation and crack propagation energies, are esti...

the lack of complete understanding of the substrate effects on carbon nanotubes (cnts) growth poses a lot oftechnical challenges. here, we report the direct growth of nanostructures such as the cnts on stainless steel 304and brass substrates using thermal chemical vapor deposition (tcvd) process with c2h2 gas as carbon sourceand hydrogen as supporting gas mixed in ar gas flow. we used an especi...

The lack of complete understanding of the substrate effects on carbon nanotubes (CNTs) growth poses a lot oftechnical challenges. Here, we report the direct growth of nanostructures such as the CNTs on stainless steel 304and brass substrates using thermal chemical vapor deposition (TCVD) process with C2H2 gas as carbon sourceand hydrogen as supporting gas mixed in Ar gas flow. We used an especi...

A die angle is one of the most important parameters for a drawing process. It should be chosen in that way that a draw stress is low, a wire surface quality is satisfactory and die durability is high [1]. The temperature of a wire in deformation zone depends on amounts of heat generated during a drawing. This heat consists of two components; one is the work piece deformation and another is fric...