In the construction industry, non-destructive testing (NDT) methods are gaining more popularity for their ability to examine the in-situ component properties without damaging the structure. One of the most common NDTs for measuring the concrete compressive strength on site is the Rebound Hammer Test. Using the rebound value obtained from the test hammer, the concrete compressive strength can be...

Introduction: This study aims to determine the amount of hand-arm vibration transmitted from heavy electric destruction tools and the effect of using chisel with different lengths and shapes when demolishing concrete surfaces. Material and Methods: To evaluate the magnitude of hand-arm vibration on the left and right handles of two powerful electric demolition hammers commonly applied in Irani...

This study investigated the temporal behavior of grand piano actions from different manufacturers under different touch conditions and dynamic levels. An experimental setup consisting of accelerometers and a calibrated microphone was used to capture key and hammer movements, as well as the sound signal. Five selected keys were played by pianists with two types of touch ("pressed touch" versus "...

A graph G = (V, E) is called a split graph if there exists a partition V = I ∪K such that the subgraphs G[I ] and G[K] of G induced by I and K are empty and complete graphs, respectively. In 1980, Burkard and Hammer gave a necessary condition for a split graph G with |I | < |K| to be hamiltonian. We will call a split graph G with |I | < |K| satisfying this condition a Burkard-Hammer graph. Furt...

Hammer-throw has a long-standing history in track and field, but unlike some other sports events, men's hammer throw has not seen a new world record since 1986. One of the possible reasons for this stagnation could be the lack of real-time biomechanical feedback training. In this study, we proposed to establish scientifically described training targets and routes, which in turn required tools t...

Vibratory installation of piles and casings can be extremely economical and therefore the contractors’ preferred method of pile driving. Compared to impact pile driving it also has the advantage of reduced noise pollution. Unfortunately, this installation method is still fraught with uncertainties. The foremost question is driveability and equally important is the question of bearing capacity o...

Hammering with a hand tool appears early in life. Skillful hammering involves accommodating movements to properties of the hammer, orienting the hammer's head to the item to be struck, and maintaining stable posture during forceful action with the arm(s). We aimed to characterize development of these abilities in young children (12, 18, and 24 months old). Children struck at a peg with a hammer...