PURPOSE The purpose of this study was to evaluate microleakage around Class V resin restorations restored with glass-ceramic inserts luted with a high-viscous composite resin or a flowable composite resin. MATERIALS AND METHODS Twenty extracted human premolars (patient age range 12-18 yr) were randomly assigned to four groups. Class V preparations in two groups were filled using a glass-ceram...

This study was performed to evaluate the effect of a lithium-disilicate spray-liner application on both the bond strength between zirconia cores and heat-pressed lithium-disilicate glass-ceramic veneers, and the fracture strength of all-ceramic zirconia crowns. A lithium-disilicate reinforced liner was applied on the surface of a zirconia core and lithium-disilicate glass-ceramic was veneered o...

This work analyzes replacing an insert made of ceramic with CBN (Cubic Boron Nitride). The inserts are cutting tools used in machining. We will start by presenting a brief account what machining is, is applicable this research and the properties two tools. also include our objective justification for carrying out project. Next, we describe all equipment process to verify results, detailing func...

Early generation ceramic articulations were problematic in terms of ceramic implant fracture and wear. Although the mechanical properties of ceramic material have improved during the last three decades, ceramic component fracture remains an issue. Many authors have reported fractures of the ceramic head, and a few have described ceramic acetabular insert fracture. However, these complications a...

The controlled precipitation of strontium fluoroapatite crystals was studied in four base glass compositions derived from the SiO2-Al2O3-Y2O3-SrO-Na2O-K2O/Rb2O/Cs2O-P2O5-F system. The crystal phase formation of these glasses and the main properties of the glass-ceramics, such as thermal and optical properties and radiopacity were compared with a fifth, a reference glass-ceramic. The reference g...

Highly porous bioactive glass-ceramic scaffolds were effectively fabricated by an inorganic gel casting technique, based on alkali activation and gelification, followed by viscous flow sintering. Glass powders, already known to yield a bioactive sintered glass-ceramic (CEL2) were dispersed in an alkaline solution, with partial dissolution of glass powders. The obtained glass suspensions underwe...

This study evaluated the influence of an alternative surface treatment on the microshear bond strength (μsbs) of zirconia-based ceramic. Thirty-five zirconia disks were assigned to five groups according to the following treatments: Control (CO), glass and silane were not applied to the zirconia surface; G1, air blasted with 100μm glass beads + glaze + silane; G2, a gel containing 15% (by weight...

High-strength all-ceramic systems for fixed partial dentures (FPDs) is gaining popularity as an alternative to the well established metal-ceramic FPDs. Several new framework materials and technique such as lithium disilicate, aluminum oxide and yttrium tetragonal zirconia polycrystal have been developed with improved strength, marginal discrepancy and esthetics. Since not every all-ceramic syst...

In this study, production possibility of glass and glass-ceramic produced from granite was investigated. The composition of granite based glass bath mixture was 50 wt% granite, 25 wt% dolomite and 25 wt% sodium carbonate. Composition that was grounded and mixed in a ball mill for 2 h was melted at 1500 ◦C for 1 h. Glass samples were heat treated for crystallization to produce glass-ceramic mate...

Bacterial and fungal infections remain a major clinical challenge. Implant infections very often require complicated revision procedures that are troublesome to patients and costly to the healthcare system. Innovative approaches to tackle infections are urgently needed. We investigated the histological response of novel free P2O5 glass-ceramic rods implanted in the jaws of beagle dogs. Due to t...