Reliability of gas turbine power plant is related to the blade normal operation. In this paper, a new on-line condition monitoring method has been presented to evaluate two important factors affecting the turbine blades that are the tip clearance and tip deformation. A K band’s microwave sensor has been simulated and optimized in CST Microwave Studio software. Scattering parameters of the near...

In the current work, different methods for optimization of turbine blade internal cooling are investigated, to achieve higher cyclic efficiency and output power for a typical gas turbine. A simple two-dimensional model of C3X blade is simulated and validated with available experimental data. The optimization process is performed on this model with two different methods. The first method is ...

A gas turbine abruptly tripped to a stop during its daily morning start-up period. Out of a total of 81 blades in the first row only one blade was broken at its root. Prior to this accident, there were three blade failure accidents in the same plant during the last 10 years. First, the fracture surface of the troubled blade was investigated. Stress analysis of the blade showed that the maximum ...

The effect of the blade tip geometry of a high pressure gas turbine is studied experimentally and computationally for high speed leakage flows. For this purpose two simplified models are constructed, one models a flat tip of the blade and the second models a cavity tip of the blade. Experimental results are obtained from a transonic wind tunnel to show the static pressure distribution along the...

In a gas-liquid stirred reactor, gas tends to accumulate in low-pressure regions behind the impeller blades. Such gas accumulation forming so-called gas cavities, significantly alters impeller performance characteristics. We have computationally investigated gas-liquid flow generated by a Rushton turbine. Rotating Rushton turbine generates trailing vortices behind the blades, which enhance the ...

Film cooling technique has been successfully applied to gas turbine blades to prevent it from the hot flue gas. However, a continuous demand of increasing the turbine inlet temperature to raise the efficiency of the turbine requires continuous improvement in film cooling effectiveness. The concept of injecting mist (tiny water droplets) into the cooling fluid has been proven under laboratory co...

The high replacement costs of aircraft gas turbine blades and vanes have created a fast-growing, highly-specialized segment of the aircraft repair industry. The economic rationale for repair in lieu of replacement is prima facie. The metallurgical rationale is less certain, but satisfactory flight performance over the past twenty-five years at least attests to the technical adequacy of blade an...

In this research, a gas turbine blade cascade was investigated. Flow analysis around the blade was conducted using RSM and RNG.K-ε turbulence modeling and it is simulated by Fluent software. The results were considered for the cases as Mach number loss at the trailing edge of blade caused by vortexes that were generated at the end of blade. Effect of cooling flow through the trailing edge on th...

Turbine machinery has an extraordinary wide range of applications in the aviation, aerospace, automotive, energy and many other industries. The turbine blade is one of the most important parts of turbine machinery, and the characteristic parameters, pressure ratio of the engine and rotating speed of the turbine are all related to the shape and size of blades. Therefore, the profile measurement ...