Hydrogen is getting increasing attention by government and industry leaders, [1], as a very environmentally attractive and clean fuel because its oxidation leads only to water formation. There is abundance of hydrogen in nature, although it is only available for exploitation in a combined state, either in water, hydrocarbons, or coal [2]. Its recovery from these natural resources requires the a...

The gas-steam turbine combined cycle (GTCC) is the preferred power plant type because of its high efficiency and its use of cheap and clean natural gas as fuel. It is also the preferred type in the Arab Gulf countries where it is used as cogeneration power-desalting plant (CPDP). In this chapter, descriptions and analysis of the GTCC components are presented, namely, the gas turbine cycle (comp...

Steam injection for power and efficiency augmentation in aeroderivative gas turbines has been commercially established for natural gas-fired cogeneration since 1980. Steam-injected gas turbines fired with coal and biomass are being developed. A performance and economic assessment of biomass integratedgasifier steam-injected gas turbine (BIGISTIG) cogeneration systems is carried out here. A deta...

The economizers are used for production of steam heating on en route ships. The economizers are producing steam in a heat exchange process from the ship’s main engine exhaust gas. Products of the incomplete combustion of the heavy fuel oil remaining in engines, passing the boiler, collect on the heat exchange surface of the economizer. When the incorrect assumptions are made for the boiler oper...

The dangers posed by non-condensable gases (NCGs) in steam sterilisation processes have long been underestimated. Biological indicators, or the best chemical indicators on the market, do not signal the presence of a NCG content of up to 10% in a sterilisation process so long as there is mixing of steam and NCGs in the sterilisation chamber. Already back in 1963, Bowie and Dick (1) demonstrated ...

Due to the importance of energy consumption in a steam network of oil refinery as a significant unit, present study is concerned with the optimization of an oil refinery steam network. Here, the attempt was made to use concepts such as first and second thermodynamic laws, thermo-economic, environmental and economic discussions to investigate three different scenarios about Tehran refinery steam...

DC lOO%-steam plasma characteristics were investigated for the application of halogenated hydrocarbon decomposition because steam plasmas are chemically reactive. However, plasma system generally requires complex subsystems such as steam generators and cooling units. The presented steam plasma system is a portable light-weight plasma generation system that does not require any gas supply unit. ...

A reliability model for a power generating system comprising two gas turbines and one steam turbine is developed wherein scheduled inspection is done at regular interval of time for maintenance. Initially, all the three units i.e. two gas turbines as well as one the steam turbine are operating and working of the system is called the working at full capacity. On failure of one of the gas turbine...

Introduction Hydrogen as a fuel has recently been an important issue due to developments in fuel cell technology. Hydrogen production from sustainable sources, e.g. biomass, is gaining attention for a CO2 neutral energy supply. Recent developments in flash pyrolysis technologies make it possible to convert lignocellulosic biomass efficiently to a bio-oil, which is easier for handling and transp...

The CFD code GASFLOW solves the time-dependent compressible Navier-Stokes Equations with multiple gas species. GASFLOW was developed for non nuclear and nuclear application. The major nuclear applications of GASFLOW are 3D analyses of steam/hydrogen distributions in complex PWR containment buildings to simulate scenarios of beyond design basis accidents. Validation of GASFLOW has been a continu...