Investigations were carried out on coal tailings by conventional cell and column flotation techniques. Tests were conducted to assess processing coal tailings of Alborz Markazi coal washing plant in Iran by column flotation. The effects of reagent type/dosage were investigated with conventional flotation and their results were used in the performance of column flotation. Also the effects of the...

This study investigates removing ash and pyrite sulphur from bitumen by column flotation process. Central composite design (CCD) of response surface methodology (RSM) was applied for modeling and optimization of the percentage of ash and pyrite sulphur removal from bitumen. The effects of five parameters namely the amounts of collector and frother agents, particle size, wash water rate and feed...

This chapter describes basic parameters, such as surface forces and film elasticity, affecting the stability of foams (two-phase froths). I used the thin film pressure balance (TFPB) technique to measure the surface forces in foam films stabilized with various frothers such as pentanol, octanol, methyl isobutyl carbinol (MIBC), and polypropylene glycol (PPG). The results were compared with the ...

The aim of this study is to compare the effect of the ultrasonic pre treatment on the removal of heavy metals (Iron, Zinc and Copper) from Acid Mine Drainage (AMD) by Denver Cell flotation. Synthetic AMD and individual metal solutions are used in the initial experiments to optimise the process conditions for real AMD. Three different process methods, ultrasound treatment followed by Denver flot...

an efficient method was employed for the ash and pyrite sulphur removal from bitumen using column flotation process. the bitumen samples containing 9.6% sulphur (6.81% in the pyrite sulphur form) and 26.4% ash were successfully showed up to 75.20% of pyrite sulphur (e.g.; 51.66% of total sulphur) and 70.81% of ash removal. the box-behnken design (bbd) was employed to design the experiments, to ...

Earlier studies at the Kevitsa Cu-Ni concentrator plant have indicated that seasonal variations of properties process water affect oxidation surface minerals, and further, pentlandite flotation performance. However, it is not clear whether differences in performance are solely due to changes mineral oxidation, and/or also oxidation-induced aqueous phase pulp. This paper investigates effects ore...

This paper studies the effect of type and concentration selected frothers, gas flowrate, pore size porous frit on bubble sizes (Sauter mean diameter, SMD) bubbling flow produced in a micro-flotation cell, determination distribution (BSD) presence frothers. The commercial frothers polypropylene glycols (PPG 200, 400, 600), tri propylene glycol (BTPG), triethylene (BTEG), dipropylene (BDPG), Meth...

Flotation is a complex process that exhibits high dimensionality which makes modeling and optimization very challenging. One technique to alleviate the problem combine variables together into more informative ones. Bubble surface area flux air recovery are examples of reduction. Gas holdup also captures effect plurality including gas rate, bubble size, surfactant type, concentration. This work ...