abstract the prediction of active earth pressures is essential to the design of retaining walls in case of reinforced and unreinforced soils. in this study, a new analytical method is presented to determine the coefficient of earth pressure. the horizontal slice method is used to compute the active earth pressure behind a rigid retaining wall in consideration of the granular soils. to verify th...

stabilization of river terraces and natural soil slopes in rangelands by means of tree roots as a reinforcement agent is an environmental adopted method which needs to be developed. in this research a series of tests was carried out on soil blocks containing willow roots and without roots using a large scale in situ direct shear test apparatus. the results were analyzed based on direct shear th...

Even though there exist lots of documents on Finite Element Strength Reduction Method, cohesion and internal friction angle in these materials are reduced through the same reduction factor, which fails to reflect either of their safe reserving quality or the quality to precisely match slope failure process and mechanism. As is known, the exterior angle circumcircle yield criterion DP1 of the ge...

Equal-channel angular pressing (ECAP) combined with the Conform process provides a solution for the continuous production of ultrafine-grained materials. In the present study finite element method was executed to investigate the effects of die channel angle and friction on the strain homogeneity and the required torque in ECAP-Conform process. Deformation behaviour of Al 6061 wires was analyzed...

Slope stability analysis is one of the most important problems in mining and geotechnical engineering. Ignoring the importance of these problems can lead to significant losses. Selecting an appropriate method to analyze the slope stability requires a proper understanding of how different factors influence the outputs of the analyses. This paper evaluates the effects of considering the real geom...

Micro-stamping process is one of the most cost-effective methods to manufacture metallic bipolar plates (BPPs). This research investigates the forming of titanium thin sheet as a potential candidate for BPPs in proton exchange membrane fuel cell (PEMFC). In this regard, the process was first simulated using finite element (FE) code Abaqus. Afterward, experimental tests were implemented and the ...

This contribution presents a friction estimator for industrial purposes which identifies Coulomb friction in a steering system. The estimator only needs a few, usually known, steering system parameters. Friction occurs on almost every mechanical system and has a negative influence on high-precision position control. This is demonstrated on a steering angle controller for highly automated drivin...

During the early stages of orthodontic treatment, the self-ligating system is more efficient because a reduction of friction in the interface archwire-bracket occurs. The friction is determined by three components: friction, binding and notching; it depends on the critical contact angle defined, for each pair of wire and brackets, where they contact in two diametrically opposite slotâ€TMs points.