In the current work optimization of double pipe fin-pin heat exchanger has been studied. The effective parameters those are controlling the heat exchanger performance are divided in two categories; geometrical and operating conditions. Using the Brent’s optimization algorithm and handling the thermodynamically design concept, one can minimize entropy generation in different length of heat excha...

In this paper the effect of site conditions, which are Altitude, Temperature and Relative Humidity and also Heat Dissipation Capacity are investigated on the optimized design of natural draft dry cooling towers with specific kind of heat exchangers, known as Forgo T60 type. A genetic algorithm program has been developed for optimized design of these cooling towers. Objective function includes b...

fridges are used in various industries, and heat exchanger is one of the main components of these systems; therefore, efficiency analysis of these systems is very important. in many fridges, frost over the heat exchanger tubes or pipes affects the system operation and reduces heat transfer between the refrigerant and ambient, so defrosting systems are usually used to enhance heat transfer. desi...

A-Type heat exchangers are used to meet required heat load with minimum duct dimensions in air-conditioning applications. This greatly reduces the air-conditioning system footprint in residential and commercial applications. The angle and tube spacing of the A-type heat exchangers should be optimized for minimum duct size and maximum heat load. However, existing air side heat transfer and press...

Recently, there have been many studies on dehumidifiers with a low flow rate of liquid desiccant, in which a plate-type heat exchanger with internal cooling is adopted. If the low flow rate of a liquid desiccant maintains a thin liquid film on the heat exchanger surface, heat and mass transfer performance would improve, the stability of the liquid film would increase, and there would be no entr...

pinch technology is one of the best methods for designing a multi stream heat exchanger(mshe) through a network; current pinch-based methods, however, lead to a larger and more complicateddesign problems. the major drawback of the current methods is they result in designs having more individual mshe sections than essential, correspond to the enthalpy intervals on temperature vs. enthalpy diagra...

the objective of the present study is the synthesis of mwcnt-tio2 hybrid nanostructures by solvothermal synthesis method with ticl4 as precursor. the heat transfer enhancement due to the use of mwcnt-tio2 nanofluid was investigated. as-prepared hybrid materials were characterized by x-ray diffraction (xrd) and scanning electron microscopy (sem). the results showed that mwcnts were uniformly dec...

in this paper the effect of site conditions, which are altitude, temperature and relative humidity and also heat dissipation capacity are investigated on the optimized design of natural draft dry cooling towers with specific kind of heat exchangers, known as forgo t60 type. a genetic algorithm program has been developed for optimized design of these cooling towers. objective function includes b...

We have developed a novel procedure for constructing high surface area silver sinter heat exchangers. Our recipe incorporates nylon fibers having a diameter of ∼ 50 μm and thin wires of bulk silver in the heat exchanger. In order to increase the thermal conductance of liquid helium within the heat exchanger, prior to sintering, the nylon fibers are dissolved with an organic acid leaving a netwo...

in this paper the effect of block shape vortex generators (vgs) on an air-water fin-tube heat exchanger has been studied experimentally using exergy analysis method. also the effect of these vgs on increasing heat transfer rate has been simulated numerically and the results show a good agreement with the experiments. in this research we used a wind tunnel to produce wind flow over heat exchange...