A nanosecond pulsed plasma discharge located between two fuel jets is used to ignite and hold jet flames in supersonic crossflows, without the use of additional devices (e.g., cavities or backsteps) for flame holding. The fuel injection nozzles and discharge electrodes are mounted flush with the surface of the flat wall adjacent to the freestream flow. The nonequilibrium plasma is produced by r...

The flame stability limit, which was involving the critical flow condition, lift off and blow out, could be affected by the burner geometry in the combustion system installation. Consequently a flame holder should be put in, to hold the flame as big as possible on a stable condition. The flame holder itself, is a device to hold the flame, whereas the flame holder could disturb the air and fuel ...

The four processes involved in the flammability of materials are described and related to the various flame retardance mechanisms that may operate. Following this the four practical approaches used in improving flame retardance of materials are described. Each approach is illustrated with a number of typical examples of flame retardants or synthetic procedures used. This overview of flammabilit...

Extinction limits and flame bifurcation of lean premixed dimethyl ether-air flames are investigated numerically using the counterflow flame with a reduced chemistry. Emphasis is paid to the combined effect of radiation and flame stretch on the extinction and flammability limits. A method based on the reaction front is presented to predict the Markstein length. The predicted positive Markstein l...

Combustion in an incinerator occurs in two dif­ ferentiated zones: (1) the solid bed, Zone I, where the principal processes are pyrolysis, gasification, and combustion, and (2) the overbed region, Zone II, where the principal processes are flame holding and final burnup. Equations are developed to relate com­ bustion intensity in each zone independently to the average combustion rate in each zo...

A method of video flame detection based on multi-feature fusion is presented in this paper. Physical characteristics of flame, including color clues, flame movement and flame flicker are incorporated into the scheme to detect fires in color video frames. Firstly, mean filtering was used to smooth the video frames and a flame color filtering algorithm was adopted to extract flame candidate regio...

Plasma technologies are a promising way of addressing number challenges in combustion, ranging from stabilization and flame-holding for hypersonic vehicles, to enabling low-emissions propulsion power. Whereas most works the literature have centered on forward problem: impact plasma different combustion metrics, including static dynamic flame stabilization; fewer studies been devoted backward or...

We present a study of the flame-embedding concept, introduced in [1] as an efficient approach for large-eddy simulation of turbulent combustion at high Reynolds and Damköhler numbers. In flame embedding, the combustion zone is modeled as an unsteady flame modified by the local tangential strain rate, with the latter extracted every time step from the flow field simulations. The flame structure ...