This paper deals with the effect of fiber aspect ratio of steel fibers on shear strength of steel fiber reinforced concrete deep beams loaded with shear span to depth ratio less than two using the artificial neural network technique. The network model predicts reasonably good results when compared with the equation proposed by previous researchers. The parametric study invol...

Fiber reinforced concrete (FRC) has been widely used due to its advantages over plain concrete such as high energy absorption, post cracking behaviour, flexural and impact strength and arresting shrinkage cracks. But there is a weak zone between fibers and paste in fiber reinforced concretes and this weak zone is full of porosity, especially in hybrid fiber reinforced concretes. So it is necess...

due to the existence of fibrous materials such as plastic fragments, the strength anisotropy of municipal solid waste (msw) materials is the main source of differences between their mechanical response in direct shear and triaxial apparatus. as an extension of earlier research on the mechanical behavior of msw using a large traixail apparatus, results presented in shariatmadari et al. [1] and k...

utilization of long fiber chemical pulp to enhance the strength properties of mechanical and chemi-mechanical pulp is served as a common approach by the papermakers. therefore softwood long fibers were exposed to chemical modification by cationic agent, eptmac, with the aim of reducing its consumption. then, the cationised fibers were mixed with cmp pulp with given ratios and the handsheets wer...

The addition of steel fibers into concrete improves the postcracking tensile strength of hardened concrete and hence significantly enhances the shear strength of reinforced concrete reinforced concrete beams. However, developing an accurate model for predicting the shear strength of steel fiber reinforced concrete (SFRC) beams is a challenging task as there are several parameters such as the co...

The mechanical characterization of short E- glass fiber reinforced, graphite and sintered bronze filled epoxy composite was carried out in this study. The aim of the present study was to develop tribological engineering material. In this study the flexural strength, theoretical and experimental density, Hardness and Impact strength of composites was investigated experimentally. The results show...

in this study, the possibility of producing wood-plastic panels was studied using two different blending methods including melt blend and dry blend. wood-plastic panels were made from recycled high density polyethylene (as resin) and mdf waste (as natural fiber) at 60, 70 and 80% by weight filler loading. nominal density and dimensions of the panels were 1g/cm3 and 35×35×1 cm, respectively. the...

Consolidated-drained triaxial compression tests were conducted to compare the stress-strain and volume change response of sands and clayey sands reinforced with discrete randomly distributed poly-propylene fibers. The influence of various test parameters such as fiber content (0.0%, 0.5% and 1.0% by weight), clay content (0%, 10% and 20% by weight), relative density (50% and 90%) and confining ...

A model has been formulated for analyzing the influence of fiber inclination angle on its rupture load in fiber reinforced cementitious composite. As a stiff fiber is pulled with an angle to the direction of pulling, the fiber rupture load decreases compared to the case with zero inclination angles. This phenomenon is called fiber apparent strength (defined as rupture load divided by fiber cros...