Ferrites have always been a subject of great interest from point of view of magnetic application, since the fist compass to present date. In contrast, the scientific interest for iron based magnetic oxides decreased after Ørsted discovery as they where replaces by coil as magnetizing sources. Néel discovery of ferrimagnetism boosted again interest and leads to strong developments during two dec...

Recent advances in microwave ferrite device technology have seen the introduction of superconductivity that virtually eliminates insertion losses due to electrical conduction in microstrip circuits. The conventional ferrimagnetic spinel and garnet compositions, however, are not generally optimized for temperatures in the vicinity of 77 K and may require chemical redesign in order to realize the...

Mn–Zn ferrite powders (Mn0.5Zn0.5Fe2O4) were prepared by the nitrate–citrate auto-combustion method and subsequently annealed in air or argon. The effects of heat treatment temperature on crystalline phases formation, microstructure and magnetic properties of Mn–Zn ferrite were investigated by X-ray diffraction, thermogravimetric and differential thermal analysis, scanning electron microscopy a...

A new roller hearth kiln(RHK) has been developed, which satisfies not only the highest quality of Mn-Zn ferrites, but also large quantity of production. Using the RHK (the length is SOm), the total sintering time is reduced to less than 11 hours, that is shorter than the half of the case of pusher kiln. Then the productive capacity of the RHK achieved 100 ton per month. Moreover, the control of...

In this study, multilayer perception neural network (MLPNN) was employed to predict thermal conductivity of PVP electrospun nanocomposite fibers with multiwalled carbon nanotubes (MWCNTs) and Nickel Zinc ferrites [(Ni0.6Zn0.4) Fe2O4]. This is the second attempt on the application of MLPNN with prey predator algorithm for the prediction of thermal conductivity of PVP electrospun nanocomposite fi...

The magnetic properties of Mg1-xZnxFe2O4 (where x = 0.3,0.4,0.5,0.6) ferrites have been studied. Magnesium Zinc Ferrites was synthesized by oxalate co-precipitation method at different synthesis temperature and characterized by X-ray diffraction and far IR absorption techniques, scanning Electron microscopy .Far infrared absorption spectra show two significant absorption bands ,first at about 6...

the composite powders of barium-magnesium ferrite were prepared using sol-gel auto-combustion and microwave methods. the crystal structure and the shape of nanocomposites have been compared. x-ray diffraction (xrd), scanning electron microscope (sem) and vibrating sample magnetometer (vsm) were used to investigate the structural, morphological and magnetic properties of nanopowder. the formatio...

Cellulose acetate (CA) nanoparticles were combined with two antimicrobial agents, namely lemongrass (LG) essential oil and Cu-ferrite nanoparticles. The preparation method of CA nanocapsules (NCs), with the two antimicrobial agents, was based on the nanoprecipitation method using the solvent/anti-solvent technique. Several physical and chemical analyses were performed to characterize the result...

The effect of frequency and sintering temperature on initial permeability of Ni0.55Zn0.45Fe2O4 ferrites have been studied by using an impedance analyzer. The samples were prepared by conventional double sintering ceramic technique using oxide nanoparticles of grain size 30 50 nm. Single phase spinal structure has been confirmed for the prepared samples by X-ray diffraction. As the sintering tem...

The influence of the firing conditions on the nanoscale structure of the grain boundaries and on the magnetic properties of polycrystalline MnZn-ferrites is investigated, on specimens of nearly identical microstructures. High oxygen partial pressures favor accumulation of impurity ions at the triple points. Under appropriate oxygen pressures homogeneous accumulation of impurities along the grai...