A prismatic beam made of a behaviorally nonlinear material is analyzed under aharmonic load moving with a known velocity. The vibration equation of motion is derived usingHamilton principle and Euler-Lagrange Equation. The amplitude of vibration, circular frequency,bending moment, stress and deflection of the beam can be calculated by the presented solution.Considering the response of the beam,...

Abstract: It is assumed that a beam made of material has a physical nonlinear behavior. This beam is analyzed under the moving concentrated and distributed continuous loads. The vibration equations of motion are derived from the Hamilton's Principle and Euler–Lagrange Equation. In this study, the amplitude of vibration, circular frequency, bending moment, stress and deflection of the beam has b...

A method based on the power series solution is proposed to solve the natural frequency of flapping vibration for the rotating inclined Euler beam with constant angular velocity. The vibration of the rotating beam is measured from the position of the corresponding steady state axial deformation. In this paper the governing equations for linear vibration of a rotating Euler beam are derived by th...

In this paper we study the dynamic behavior of an isotropic KirchhoffLove beam and investigate the equilibrium position of an Euler-Bernoulli beam. Using the discrete Euler-Lagrange and Lagrange-d’Alembert principles, we simulate the behavior by means of variational integrators and, in particular, AVIs (Asynchronous Variational Integrators). We place special emphasis on the geometric structure ...

Analytical relations between the critical buckling load of a functionally graded material (FGM) Timoshenko beam and that of the corresponding homogeneous Euler–Bernoulli beam subjected to axial compressive load have been derived for clamped–clamped (C–C), simply supported–simply supported (S–S) and clamped–free (C–F) edges. However, no such relation is found for clamped–simply supported (C–S) b...

This paper discusses some notes on the vibration design for the piezoelectric cooling fan. After reviewing the fundamental formulas of the cantilever Euler beam, it is not easy to find the optimal design of the piezoelectric fan. The experiments also show the complicated results of the vibration behavior and air flow. Keywords—Piezoelectric cooling fan, vibration, cantilever Euler beam, air flow.

Free vibration analysis of higher-order shear deformation beam resting on one- and two-parameter elasticfoundation is studied using differential transform method (DTM) as a part of a calculation procedure. First,the governing differential equations of beam are derived in a general form considering the shear-freeboundary conditions (zero shear stress conditions at the top and bottom of a beam). ...

the vibration of cable-stayed bridges subjected to the passage of high-speed trains is studied in this article. the moving train includes a number of wagons, each of which is modeled as a four-axle system possessing 48 degrees of freedom. the car model is nonlinear and three-dimensional and includes nonlinear springs and dampers of primary and secondary suspensions, dry friction between differe...

The vibration problems of uniform and nonuniform Euler-Bernoulli beams have been solved analytically or approximately [1-5] for various end conditions. In order to calculate fundamental natural frequencies and related mode shapes, well known variational techniques such as Rayleigh_Ritz and Galerkin methods have been applied in the past. Besides these techniques, some discretized numerical metho...

In the present analysis, an infinite Euler– Bernoulli beam of constant cross-section resting on an elastic foundation is considered. The beam and foundation are assumed to be homogeneous and isotropic. The foundation is modeled using one parameter without damping. The beam is subjected to a constant point load moving with a constant speed along the beam. An effort has been made to find the solu...