Rev. A Circuits from the LabTM circuits from Analog Devices have been designed and built by Analog Devices engineers. Standard engineering practices have been employed in the design and construction of each circuit, and their function and performance have been tested and verified in a lab environment at room temperature. However, you are solely responsible for testing the circuit and determinin...

Clay modified carbon paste electrode (CPE-C) its applicability for electroanalysis of N, N’-ethylene-2,2’-bipyridinium (diquat) has been described in the present work. Electrochemical modification was performed by electronic impedance spectroscopy (EIS) and cyclic voltammetry (CV) in the range of -0.6 V to 1.2 V in 0.1 M K2SO4 (pH 3). The voltammetric method behavior of DQ is suggested where an...

The present study was designed to develop a simple, validated liquid chromatographic method for the analysis of azithromycin in bulk and pharmaceutical dosage forms using ultraviolet detector. The best stationary phase was determined as C18 column, 5 μm, 250 mm × 4.6 mm. Mobile phase was optimized to obtain a fast and selective separation of the drug. Flow rate was 1.5 mL/min, Wavelength was se...

Lithol Rubine B (LRB; the disodium salt of 3-hydroxy-4-[(4-methyl-2-sulfophenyl) azo]-2-naphthalenecarboxylic acid) was detected using high-performance liquid chromatography with an electrochemical (antimony film on silver) detector (HPLC-ECD). For direct current (DC) mode, with the current at a constant potential, and measurements with suitable experimental parameters, a linear concentration f...

Graphene ink is a commercialized product in the graphene industry with promising potential application in electronic device design. However, the limitation of the graphene ink is its low electronic performance due to the ink preparation protocol. In this work, we proposed a simple post-treatment of graphene ink coating via electrochemical oxidation. The electronic conductivity of the graphene i...

Background: The Poly-Allyl Diglycol Carbonate (PADC) detector is of particular interest for development of a fast neutron dosimeter. Fast neutrons interact with the constituents of the CR-39 detector and produce H, C and O recoils, as well as (n, α) reaction. These neutron- induced charged particles contribute towards the response of CR-39 detectors. Material and Methods: Electrochemical...

a rapid isocratic method of high performance liquid chromatography system (hplc) with a glassy carbon working electrode of electrochemical detector is set up for quantitative detection of  trace amount of nitrite ion (no2¯) in aqueous protein containing cell lysate, cell media, plasma, serum, urine and other body fluids. the solid extraction  reversed phase cartridges (sep-pak) are used for dep...

Development and characterization of a simple microfluidic electrochemical flow cell that can be coupled with HPLC to enable dual absorbance/electrochemical detection is described. Coupling absorbance and electrochemical detection increases the information that can be gathered from a single injection, but a second (typically expensive) detection system is required. Here, an inexpensive, customiz...

Microdialysis probes have been tested to evaluate the influence of flow-rate, probe dimensions and temperature when used as sampling systems inserted subcutaneously for in vivo monitoring of glucose. The probe was coupled with a glucose biosensor obtained from a thin layer electrochemical cell generally used as detector for liquid chromatography. Glucose oxidase was immobilized on a nylon net m...

A high-performance liquid chromatographic method for the determination of penicillamine in plasma, whole blood, and urine samples is described. The method uses a commercially available electrochemical detector at a potential of +0.1 V versus the Ag/AgCl reference electrode. This method is selective and sensitive for sulfhydryl compounds. The chromatography separates penicillamine from other end...