the aim of this research was to study the wear behavior of 42crmo4 steel/zro2 composite with 10 and 30 ppi performed ceramic and compare it with the un-reinforced steel under different applied loads. the composite specimens were obtained by pressureless infiltration of the melt into a preformed ceramic of zirconium oxide. the effect of applied load on the specimens wear behavior was studied by ...

ball mills are common grinding equipment in mineral processing industries. ball wear results from three mechanisms namely impact, abrasion and corrosion. of these, the corrosion mechanism is the least investigated, due to its chemical-electrochemical nature. therefore, the aims of this research were to investigate the grinding chemistry influence (slurry ph, solid percentage, water chemistry an...

Previous studies have demonstrated that the wear-corrosion synergism can be markedly affected by the loading speed. In this study, effects of the loading speed or strain rate on corrosion and corrosive wear of annealed, impact-fractured and slow bending-fractured surface layers of AISI 1045 steel in a 3.5% NaCl solution were investigated using electrochemical, scanning Kelvin probing and electr...

The objective of this study was to assess the suitability of using multidirectional pin-on-disk (POD) testing to characterize wear behavior of retrieved ultrahigh molecular weight polyethylene (UHMWPE). The POD wear behavior of 25 UHMWPE components, retrieved after 10 years in vivo, was compared with 25 that were shelf aged for 10-15 years in their original packaging. Components were gamma ster...

In this study, the corrosion behavior of Mg-Zn-Se and Mg-Zn-Cu alloys was investigated to evaluate their corrosion behavior related to use as implantable biomaterials. The corrosion behavior of these alloys and a commercially available Mg-Zn alloy were examined using static solution electrochemical testing, dynamic solution gravimetric testing, ion leaching testing, and microscopic evaluation. ...

Abstract The effect of contact load and relative displacement on tribo-corrosion interaction parallel steel wires main cable in the suspension bridge was investigated this study. A self-made test bench employed to conduct tests 3.5% (wt%) NaCl solution deionized water under different loads displacements. friction coefficient wear were presented. Electrochemical corrosion behavior (Tafel polariz...

OBJECTIVES The primary aim of this research was to investigate the wear behavior and wear mechanism of five different veneering porcelains. METHODS Five kinds of veneering porcelains were selected in this research. The surface microhardness of all the samples was measured with a microhardness tester. Wear tests were performed on a ball-on-flat PLINT fretting wear machine, with lubrication of ...