Stress state analysis to casing-cement sheathformation system (CCSFS) is the foundation of the wellbore integrity design and examination. Many elastic mechanic models have been established to calculate the stresses and displacements of CCFS, but all analytical models and most finite element models took no account of the initial loaded state, and ignored the initial stresses and displacements on...

OBJECTIVES Besides the fixation of the restoration, an important function of dental luting cements is to seal the gap between tooth and restoration. However, as a result of adhesion, curing contraction is hindered, creating stresses. To maintain the seal these stresses neither exceed the bond nor the cohesive strength of the cement. The aim of this study was to evaluate a rather simple model, w...

In this study, unconfined compression tests have been conducted to investigate the impacts of copper slag on mechanical characteristics for stabilized cement and un-stabilized soil. Dozens of specimens were prepared at four percentages of cement (i.e. 0%, 2%, 4% and 6%) and five percentages of copper slag (i.e. 0%, 5%, 10%, 15% and 20%) by weight of dry soil. The samples compacted into a cylind...

This work presents a numerical approach in order to predict the influence of implant material stiffness in a femoral component design when submitted in compression. The implant success depends on the transferred load to the neighboring bone. The finite element method can be used to analysis the stress and strain distribution in the femoral component allowing to improve the implant selection. Fo...

Calcium leaching induced aging in concrete creates a new material with degraded macroscopic mechanical properties. Although the degradation of strength has been elaborately studied in the last decade, the degradation of elasticity has not been investigated in the same depth. This thesis presents a combined experimental-theoretical investigation of the loss of elastic modulus due to calcium leac...

Introduction. Failure of the bone cement in a total joint replacement can lead to implant loosening and ultimately necessitate device revision. Establishing and maintaining the integrity of the polymethylmethacrylate (PMMA) bone cement is thus important to the long-term performance of cemented joint replacements. In particular, the fracture toughness or work to failure of the cement may play an...

We hypothesized that recently formed, incompletely mineralized, and thus, relatively deformable osteons in the equine third metacarpus enhance in vitro load-controlled fatigue life in two ways. Macroscopically, there is a compliance effect, because reduced tissue elastic modulus diminishes the stress required to reach a given strain. Microscopically, there is a cement line effect, in which new ...

Ettringite is a hexacalcium aluminate trisulfate hydrate mineral that forms during Portland cement hydration. Its presence plays an important role in controlling the setting rate of the highly reactive aluminate phases in cement paste and has also been associated with severe cracking in cured hardened cement. To understand how it forms and how its properties influence those of hardened cement a...

We have studied the rheological property evolution and hydration behavior of white and ordinary portland cement (type I) pastes and concentrated cement–polyelectrolyte suspensions. Cement composition had a marked effect on the elastic property evolution (G (t)) and hydration behavior of these suspensions in the presence of poly(acrylic acid)/poly(ethylene oxide) copolymer (PAA/PEO), even though...

This paper reports a biological evaluation of a non-resorbable acrylic cement loaded with alendronate for the treatment of osteoporotic vertebral compression fractures. The cement formulation was based on polymethyl methacrylate and acrylic monomers; one of these had covalently linked vitamin E residues. The same cement in the absence of alendronate was used as a control. The setting of the cha...