the creep/recovery behavior of wood flour-polypropylene was compared with medium density fiberboard (mdf) and particleboard. for this purpose, wood flour-polypropylene composites (with and without compatibilizer)were manufactured by using a laboratory twin-screw extruder. the mdf and particleboard panels were obtained from local producers. short term flexural creep tests at 30% of ultimate bend...

the effect of impact modifier on creep behavior of wood flour- recycled polypropylene composites has been evaluated in this work. for this purpose, impact modifier (ethylene vinyl acetate) and recycled polypropylene were mixed with wood flour (50/50% w/w) as well as the impact modifier (0, 3%, 6% and 9%) by a counter-rotating twin-screw extruder to manufacture the wood flour- recycled polypropy...

in this paper the effects of non-linearity of suspension on dynamic behavior of a railway wheelset has been studied. this wheelset has four degrees of freedom that with two constraints it has reduced to two degrees of freedom. vermeulen-johnson theory has been used to calculate contact forces between wheel and rail. in this study the creep coefficients have considered constant. any linearizatio...

Creep deformation in < 001 > oriented single crystals of CMSX-3 has been studied at temperatures around 850°C at a stress level of 552 MPa. Detailed observations of the evolution of the dislocation structure during creep have been made. TEM stereo pairs show creep deformation in the matrix phase, leaving the 7’ precipitates undeformed. In previously undeformed crystals there is a brief incubati...

Viscoelastic material behavior is often characterized using one of the three measurements: creep, stress-relaxation or dynamic sinusoidal tests. A two-stage numerical method was developed to allow representation of data from creep and stress-relaxation tests on the Fourier axis in the Laplace domain. The method assumes linear behavior and is theoretically applicable to any transient test which ...

Grain-boundary (GB) diffusion creep (Coble creep) is the dominant deformation mechanism for the fine-grained materials under low stress and at elevated temperature [1]. From the classical Coble creep formula [1], the strain rate is proportional to the external stress, and inversely proportional to the cube of the grain size: 3 ~ − d σ ε& . During creep deformation the grains become elongated in...

Creep polycrystalline ice samples antifreeze glycopeptides re-accelerating or tertiary samples. Previous work grain-boundary migration consistent with this, as nucleation and growth of curves containing (AFGPs) creep that has shown obtained from the low concentrations of do not show the is found in pure ice that AFGPs inhibit in ice and the present results are tertiary creep is associated with ...

Background: The short-time creep behavior for a series of biodegradable nanocomposites which is used as implantable device into body is a crucial factor. In the current paper, we aimed to study the effect of bioactive glass nanoparticles (BGn) on creep and creep-recovery behaviors of PLA/PCL blends at different given load and different applied temperatures. Method: A series of biodegradab...

In the Present study, attempt will be made to propose a new method for prediction of long-term essential creep of concrete utilizing some short-term creep tests under high temperature. To do so, regarding the similarities between essential creep of concrete and creep in viscoelastic materials, the time–temperature equivalence relation in viscoelastic materials is evaluated for concrete. This re...

Nanoclays are new generation of processed clays of interest in a wide range of high performance composites. In other words, nanoclay is defined as a clay that can be modified to make the clay complexes compatible with organic monomers and polymers. Here, it can be said that the polymeric nanocomposites are among the most exciting and promising classes of materials discovered recently. A number ...