We have investigated the insights of photo-physical surface characteristics for Ru (II) polypyridyl dye (N719) sensitization and its performance in dye-sensitized solar cells (DSSCs) at different temperatures ZnO-based photoanodes. The maximum power conversion efficiency 2.25% with a high open-circuit voltage 0.87 V was recorded 40 °C sensitized device under 1SUN 1.5 AM. 60 shows current densit...

In this study, we investigated the effect of using large TiO2 nanoparticles in the matrix of small nanoparticles to improve the performance of dye-sensitized solar cells (DSSCs), as light scatter to increase the light harvesting. The mixed powder was deposited by electrophoretic deposition (EPD) on FTO (F-SnO2 coated glass). It is shown that adding small quantity of larger...

Glutathione-capped gold nanoclusters (Aux-GSH NCs) are anchored along with a sensitizing squaraine dye on a TiO2 surface to evaluate the cosensitizing role of Au(x)-GSH NCs in dye-sensitized solar cells (DSSCs). Photoelectrochemical measurements show an increase in the photoconversion efficiency of DSSCs when both sensitizers are present. The observed photoelectrochemical improvements in cosens...

Dye-sensitized solar cells (DSSCs) were prepared by capitalizing on mesoporous P-25 TiO(2) nanoparticle film sensitized with N719 dyes. Subjecting TiO(2) nanoparticle films to TiCl(4) treatment, the device performance was improved. More importantly, O(2) plasma processing of TiO(2) film that was not previously TiCl(4)-treated resulted in a lower efficiency; by contrast, subsequent O(2) plasma e...

The most efficient dye-sensitized solar cells (DSSCs) have had essentially the same configuration (nanoparticle TiO2 sensitized with [Ru(4,4 -dicarboxy-2,2-bipyridine)2(NCS)2] in contact with I3 /I ) for the last 17 years. In this article we outline the strategies for improving each of the three major photo-relevant components of a DSSC, review literature reports consistent with these strategie...

For high solar conversion efficiency of dye-sensitized solar cells [DSSCs], TiO2 nanofiber [TN] and Ag-doped TiO2 nanofiber [ATN] have been extended to be included in TiO2 films to increase the amount of dye loading for a higher short-circuit current. The ATN was used on affected DSSCs to increase the open circuit voltage. This process had enhanced the exit in dye molecules which were rapidly s...

Fresh and dried leaves of Lawsonia inermis (Henna) were used in extracting dyes with variety solvents such as ethanol, acetone distilled water. To our knowledge, has been for the first time solvent to extract henna dye. These extracted sensitizers Dye-Sensitized Solar Cells (DSSCs). A sum six DSSCs fabricated. Spectroscopic studies (UV–Visible FTIR) recorded all photo-anodes prepared. J–V Chara...

A  commercial  Ti-Nanoxide  was  deposited  on  In-doped  SnO2 (ITO) polymer  substrates by  tape casting  technique with different thicknesses  (7,  14  and  36μm)  to  be  used  as  photoelectrode  in flexible  dye-sensitized  solar  cells  (DSSCs).  Ruthenium  dye  was adsorbed on each TiO2 film for 24 h. The resulting photoelectrodes were used to form flexible DSSCs in combination with...

Dye sensitized solar cells (DSSCs) employing a dimer porphyrin, which was synthesised with two porphyrin units connected without conjugation, have shown that both porphyrin components can contribute to photocurrent generation, that is, more than 50 % internal quantum efficiency. In addition, the open-circuit voltage (Voc) of the DSSCs was higher than that of DSSCs using monomer porphyrins. In t...