The selective removal of lead and chlorine with minimizing zinc loss from electric arc furnace (EAF) dust is very important in the process for recovering high purity zinc from the EAF dust by high temperature metal recovery (HTMR) processes. In this study, the volatilization reaction of lead contained in the EAF dust was investigated at reaction temperatures between 973 and 1223K in air. The ma...

We present some recent results on two innovative applications of microelectronics technology to dust inventory measurement and dust removal in ITER. A novel device to detect the settling of dust particles on a remote surface has been developed in the laboratory. A circuit board with a grid of two interlocking conductive traces with 25 μm spacing is biased to 30 – 50 V. Carbon particles landing ...

Demolition of older housing for urban redevelopment purposes benefits communities by removing housing with lead paint and dust hazards and by creating spaces for lead paint-free housing and other community resources. This study was conducted to assess changes, if any, in ambient dust lead levels associated with demolition of blocks of older lead-containing row houses in Baltimore, Maryland (USA...

Particulate matter (PM) pollution has become a serious threat to human health. Accordingly, an air filtration media that can efficiently remove particulate should be developed immediately. Nanofibrous membrane filter prepared by electrospinning technology nanoscale diameter, high specific surface area, and relatively porosity, which are suitable for dust removal. This paper explored the effects...

A method of determining dust emission and efficiency of its removal by means of local exhaust ventilation from machinery has been described. It complies with Standard No. EN 1093-3:1996 (European Committee for Standardization, 1996) and consists in determining air pollution concentrations in the measurement duct used for air removal from the chamber incorporating devices to be tested. The air v...

this study illustrates the process of removal of chromium from chrome tanning waste-water by fly ash which was drive from chrome shaving dust. this experiment was carried out in a batch process with laboratory prepared adsorbent samples and chrome tanning water collected from local tanneries. the influence of various factors likes adsorbent doses, contact time, and initial concentration of chro...

The choice of management practices for the treatment of piggery effluent prior to its disposal to waterways or land is governed by the desire to simultaneously minimise the cost of treatment whilst minimising pollution of the environment. Laboratory experiments were conducted to compare the removal of total and total filterable phosphorus (P) (<0.45 microm) from ortho-phosphate solutions or pig...

-Electrodynamic screens (EDS) have proved to be an efficient method for dust removal from a variety of surfaces including photovoltaic (PV) cells. An EDS is composed of a series of parallel electrodes on a substrate that is energized by a three phase high-voltage amplifier. This technology would be critical for deployment of PV arrays in remote, dusty atmospheres such as the surface of mars. As...