Numerous spray machines are used to apply pesticides for the control of human disease vectors, such as mosquitoes and flies, and the selection and setup of these machines significantly affects the level of control achieved during an application. The droplet spectra produced by 9 different ultra-low-volume sprayers with oil- and water-based spray solutions were evaluated along with 2 thermal fog...

Spray cooling is one of the most promising technologies in applications which require large heat removal capacity in very small areas. Previous experimental studies have suggested that one of the main mechanisms of heat removal in spray cooling is forced convection with strong mixing due to droplet impingement. These mechanisms have not been completely understood mainly due to the large number ...

This paper represents the ability of the newly introduced One-dimensional Rainbow Technique (ORT) to characterize the evaporation of monodispersed droplet in the large range of environment temperature. At the low temperature (room temperature), the small change of drop size is measured from the phase shift of ripple structure. The size change, as small as 10 nm for 80 μm droplet, can be measure...

We study dense and highly polydisperse emulsions at droplet volume fractions ϕ≥0.65. We apply oscillatory shear and observe droplet motion using confocal microscopy. The presence of droplets with sizes several times the mean size dramatically changes the motion of smaller droplets. Both affine and nonaffine droplet motions are observed, with the more nonaffine motion exhibited by the smaller dr...

T he contact angle of a droplet impinging upon a hot surface undergoes changes as the drop spreads and recoils. The motion of the liquid and the effect of evaporation from the edges of the drop affect the contact angle. The changes in the contact angle during spreading affect the spreading characteristics of the droplet upon impact. However, the models available in literature for the maximum sp...

The combustion of JP8 (a kerosene-based fuel) mixed with up to 20% (volume) tripropylene glycol monomethyl ether (TPGME, CH3[CH2CH(CH3)O]3OH) is studied to examine the influence of composition on soot dynamics for the configuration of an isolated and stationary droplet burning with nearly spherical symmetry. The spherical droplet flame is characterized by a one-dimensional transport process wit...

Using a unique, near-field microscopy technique, fringe patterns and nanoparticle motions are visualized immediately following a nanofluid droplet deposition on a glass substrate in which an air bubble is entrapped. The nanofluid consists of DI-water, 0.10% Aluminum Oxide nanoparticles with an average diameter of 50 nm, and 0.0005% yellow-green polystyrene fluorescent particles of 1 μm diameter...

A shower cooling tower (SCT) operates without fill because of salt decomposition on the fill that leads to deterioration of conventional cooling tower performance. This study presents a two-dimensional mathematical model for energy and exergy analysis of multi-diameter droplets and air interaction along with the height of the forced draft SCT, to predict the exit condition of water droplet for ...

where _ cgm is the viscous shear stress, with _ c the shear rate and gm the matrix viscosity, Do is initial droplet diameter, and G is the interfacial tension. A steady applied shearing flow that is not so fast as to lead to droplet rupture will eventually stretch a droplet into a roughly ellipsoidal steady-state shape, and the steady-state degree of deformation, defined as the deformation para...