Silica-based thulium-doped fiber devices operating around 810 nm would extend the spectral range covered by highpower fiber devices. Using a comprehensive numerical model of the fiber we have shown that efficient lasing at 810 nm can be achieved for specific ranges of the laser cavity parameters in silica-based thulium-doped fibers with enhanced 3 H4 lifetime up to 58 !s as measured in our high...

We report linear dispersion compensation, soliton pulse formation, soliton compression, and ultra-broad supercontinuum generation in a holey fiber with anomalous dispersion at wavelengths above 800nm. The holey fiber was seeded with ultrashort pulses from a diode pumped, Ytterbium (Yb)-doped fiber source operating at 1.06 microm. The results highlight the compatibility of the rapidly developing...

Radiation effects of photon irradiation in Ytterbium-doped silica optical fibers are still much less explored despite their importance in space-based application as radiation dosimetry. This study investigates and compares the thermoluminescence glow curve, response, linearity and sensitivity of Ytterbium-doped SiO2 optical fibers with that of TLD-100. Samples are placed in solid phantom and ir...

We report a 20 W linearly polarized, spectrally clean Yb-doped fiber laser at 1120 nm with an optical conversion efficiency of 54%. An excellent polarization extinction ratio of more than 23 dB is obtained using fiber Bragg gratings (FBGs) polarization selection technique at all power levels. The results reveal that a Yb-doped fiber laser at 1120 nm could be a promising replacement compared to ...

A nanoparticle (NP) doping technique was developed for fabricating erbium (Er)- and holmium (Ho)-doped silica-based optical fibers for high energy lasers. Slope efficiencies in excess of 74% were realized for Er NP doping in a single mode fiber based master oscillator power amplifier (MOPA) and 53% with multi-Watt-level output in a resonantly cladding-pumped power oscillator laser configuration...

A stable dual-wavelength thulium-doped fiber laser operating at 1.9 μm using a short length of photonic crystal fiber (PCF) has been proposed and demonstrated. The photonics crystal fiber was 10 cm in length and effectively acted as a Mach-Zehnder interferometry element with a free spectral range of 0.2 nm. This dual-wavelength thulium-doped fiber laser operated steadily at room temperature wit...

A highly sensitive fiber optic current sensor using terbium doped fiber is presented. The Verdet constant of the terbium doped fiber at 1300nm is found to be 19.5μrad/A using both a polarimetric and interferometric type sensor. Measurements on a Sagnac-loop sensor using 10cm of terbium doped fiber placed inside a solenoid show over 40dB of open loop dynamic range as well as a minimum detectable...

We demonstrate electrical tunability of a fiber laser using a liquid crystal photonic bandgap fiber. Tuning of the laser is achieved by combining the wavelength filtering effect of a tunable liquid crystal photonic bandgap fiber device with an ytterbium-doped photonic crystal fiber. We fabricate an all-spliced laser cavity based on the liquid crystal photonic bandgap fiber mounted on a silicon ...

We successfully fabricate three-mode erbium doped fiber with a confined Er(3+) doped ring structure and experimentally characterize the amplifier performance with a view to mode-division multiplexed (MDM) transmission. The differential modal gain was effectively mitigated by controlling the relative thickness of the ring-doped layer in the active fiber and pump launch conditions. A detailed stu...

• Understand the principle of operation of the erbium-doped fiber amplifier (EDFA). • Construct an EDFA and an erbium-doped fiber laser. • Measure and calculate the essential parameters of the constructed EDFA. The basic theories on optical amplification by erbium-doped fibers are presented in this section as preparation for the discussions on noise characteristics and noise reduction methods p...