Minimizing energy dissipation has emerged as the key challenge in continuing to scale the performance of digital computers. The question of whether there exists a fundamental lower limit to the energy required for digital operations is therefore of great interest. A well-known theoretical result put forward by Landauer states that any irreversible single-bit operation on a physical memory eleme...

The steel frame reinforced with steel shear wall is a lateral load resisting system and has higher strength and shear performance than the concrete shear wall system. Especially, using corrugated steel plates in these shear wall systems improves out-of-plane stiffness and flexibility in the deformation along the corrugation. In this paper, a cyclic loading test of this steel frame reinforced wi...

Recently the stepped spillways have been used as an appropriate solution for energy dissipation. In the present study, Siahbisheh dam spillway is simulated by using Computational Fluid Dynamic (CFD), in which the Mixture method and Reynolds Stresses Model (RSM) turbulence model is used. In the first modeling series the over all steppes slope is constant. The number of the steps is increased to ...

Laminar two dimensional forced convective heat transfer of Al2O3 –water nanofluid in a horizontal microchannel has been studied numerically, considering axial conduction, viscous dissipation and variable properties effects. The existing criteria in the literature for considering viscous dissipation in energy equation are compared for different cases and the most proper one is applied for the re...

experiments were carried out to observe the influence of loading type on concrete beam specimens. beam specimens made of similar concrete mixture with the same geometry were tested under three point static loading and low velocity drop weight impact loading. load – displacement behavior, absorbed energy dissipation capacity, stiffnesses, failure modes of beam specimens were obtained and discuss...

[1] The solar wind is filled with strong current sheets and sudden velocity shears; often the two are co-located. Sudden velocity shears at 1 AU are statistically analyzed using ACE measurements from 1998 to 2008. The occurrence rates of passage and the orientations of the shear planes are examined. For shear layers with vector velocity changes |Dv| > 50 km/s, an average of 12 pass the Earth pe...

abstract stepped spillways are of most important hydraulic constructions to dissipation energy of water flow. these constructions are used in opening channel to transfer water from upper level to lower level. because of considerable effect of steps on flow dissipation energy and also the resulted developments in construction of roller competed concrete rcc, the mentioned constructions have draw...

In this article, the effects of viscous dissipation and inertial force on the velocity and temperature distributions of the mixed convection laminar flow in a vertical channel partly filled with a saturated porous medium have been studied. In this regard, the Brinkman–Forchheimer extended Darcy model was adopted for the fluid flow in the porous region. In addition, three different viscous dissi...

Electrothermal energy storage (ETES) provides bulk electricity storage based on heat pump and heat engine technologies. A subcritical ETES is described in this paper. Based on the extremum principle of entransy dissipation, a geometry model is developed for heat transfer optimization for subcritical ETES. The exergy during the heat transfer process is deduced in terms of entropy production. The...