Direct Metal Laser Sintering (DMLS) was introduced to meet the objective of producing metal parts directly from CAD data. CRDM has accumulated six years of experience in applying this technique, mostly to prototyping parts for evaluation. For some applications, such as blow moulds, porosity generated in DMLS has proved to be beneficial, but for others a concession on tolerances or finish are ne...

The method used consists in short-term monitoring programs (microclimate and air quality) carried out in four rooms with different significant aspects. On the basis of climatic data of Rome geographic area, the microclimatic monitoring has been performed during the most critical period (summer to autumn). For chemical control, the total deposited particulate matter was evaluated using a prototy...

Microcrystalline growth regimes and solar cells obtained in different pressure and silane depletion conditions are studied in a large area KAI-S plasma reactor. The microcrystalline material quality is systematically investigated by Fourier Transform Photocurrent Spectroscopy (FTPS) to evaluate the defect density. It is shown that higher pressure and silane depletion positively affect the mater...

We report on a measurement of craters in thin dielectric films formed by Xe(Q+) (26 ≤ Q ≤ 44) projectiles. Tunnel junction devices with ion-irradiated barriers were used to amplify the effect of charge-dependent cratering through the exponential dependence of tunneling conductance on barrier thickness. Electrical conductance of a crater σ(c)(Q) increased by 4 orders of magnitude (7.9 × 10(-4) μ...

We explore how the atomic-scale structural and chemical properties of an oxide-supported monolayer (ML) catalyst are related to catalytic behavior. This case study is for vanadium oxide deposited on a rutile α-TiO2(110) single-crystal surface by atomic layer deposition (ALD) undergoing a redox reaction cycle in the oxidative dehydrogenation (ODH) of cyclohexane. For measurements that require a ...

A novel approach for the marking of deposited lithium on graphite anodes from large automotive lithium-ion cells (≥6 Ah) is presented. Graphite anode samples were extracted from two different formats (cylindrical and pouch cells) of pristine and differently aged lithium-ion cells. The samples present a variety of anodes with various states of lithium deposition (also known as plating). A chemic...

109 2:50 PM Maintaining Consistent Conditions over a Wide Range of Material Deposition Rates in Beam-Based Additive Manufacturing: Jack Beuth1; Shane Esola1; Raymond Walker2; 1Carnegie Mellon University; 2Keystone Synergistic Enterprises Signifi cant advances have been made in the development of laser and electron beam-based freeform fabrication processes using powder injection, powder bed or w...

The study of effect of laser scanning speed on material efficiency in Ti6Al4V application is very important because unspent powder is not reusable because of high temperature oxygen pick-up and contamination. This study carried out an extensive study on the effect of scanning speed on material efficiency by varying the speed between 0.01 to 0.1m/sec. The samples are wire brushed and cleaned wit...

LiNi0.4Co0.3Mn0.3O2 thin film electrodes are fabricated from LiNi0.4Co0.3Mn0.3O2 raw powder at room temperature without pretreatments using aerosol deposition that is much faster and easier than conventional methods such as vaporization, pulsed laser deposition, and sputtering. The LiNi0.4Co0.3Mn0.3O2 thin film is composed of fine grains maintaining the crystal structure of the LiNi0.4Co0.3Mn0....