This study investigated the influence of nanoclay on the impact damage resistance of glass fiber-epoxy composites under high velocity ice impact loading. Addition of 0.5 wt. % nanoclay into epoxy was shown to improve damage resistance compared to composite plates having no nanoclay platelet. The glass fiber-epoxy composites containing nanoclay brought about substantial improvement in ice impact...

A microresonator-based interfacial fatigue testing technique was used to investigate the subcritical delamination of atomic-layer-deposited alumina coatings along the sidewalls of deep-reactive-ion-etched monocrystalline silicon thin films. This technique ensures loading conditions relevant to microelectromechanical system devices, including kHz testing frequency and fully reversed cyclic stres...

With advanced composites increasing replacing traditional metallic materials, the material inhomogeneity and inherent anisotropy of such materials lead to not only new attributes for aerospace structures, but also introduce new technology to damage tolerant design and analysis. The deleterious effects of changes in material properties and initiation and growth of structural damage must be addre...

The distinguishing characteristics of carbon fibre reinforced laminates, like low weight, high strength or stiffness, had resulted in the increase of their use during the last decades. Although parts are normally produced to “near-net” shape, machining operations like drilling are still needed. In result of composites non-homogeneity, this operation can lead to delamination, considered the most...

This paper describes the experimental investigation on the effect of ply thickness on the first ply failure, delamination, and the subsequent final failure of graphite/epoxy composite laminates. The laminates considered in this paper are a cross-ply and two quasi-isotropic laminates containing thin plies in the desired interface. The onset of the first ply failure and delamination, and the stre...

Glass Fiber Reinforced Plastic composites have an increased application in recent days, due to its enhanced structural, mechanical and thermal properties. The heterogeneous nature of this kind of materials makes complications during machining operations. Drilling of holes in GFRP becomes almost unavoidable in fabrication. However, drilling is a common machining practice for assembly of componen...

Drilling carbon/epoxy laminates is a common operation in manufacturing and assembly. However, it is necessary to adapt the drilling operations to the drilling tools correctly to avoid the high risk of delamination. Delamination can severely affect the mechanical properties of the parts produced. Production of high quality holes with minimal damage is a key challenge. In this paper, delamination...

BACKGROUND Femoroacetabular impingement (FAI), it is a clinical syndrome relatively recently recognized as source of hip mechanic pain and early osteoarthritis. Two types of FAI have been described, based on the bone morphology and pattern of chondral and labral damage; the cam type is frequently associated with chondral delamination; and the pincer type is associated with a contre-coup injury ...

Impact tests were carried out on composite laminates and composite scarf repairs, while both were subjected to in-plane loading with tensile pre-strain levels up to 5000 microstrain. The results show that pre-straining of the composite laminates has no noticeable influence on the size of the delamination area for the given impact energy of 8 J, which represents a typical barely-visible impact o...

Whilst drilling is the most frequently employed operation of secondary machining for structure joining, delamination is a very serious defect during drilling of fiber-reinforced composite materials,. The evaluation of the delamination damage in the material is important but rather difficult, particularly for carbon fiber-based composites, because their colour makes visual inspection difficult. ...