a membrane bioreactor (mbr) system based on a dead-end immersed hollow fiber membrane and filamentous fungus aspergillus oryzae were used for treatment of baker’s yeast wastewater. the fungus was adapted to the wastewater in the bioreactor for two weeks before starting the continuous process. average organic loading rate of 4.2 kg cod/m3.d was entered the bioreactor. mbr system was able to redu...

a pvc-based membrane containing cerium phosphate was developed. unlike the cerium phosphate itself that acts as a cation exchanger, the membrane exhibited anion-exchange properties. therefore, the utility of this compound as a sensory element for detection of molybdate ions was pursued. the response of molybdate selective electrode based on this membrane was perfectly linear in the concentratio...

the polysulfone-based membrane has been used in hemodialysis (hd) and it is continuously developed to maintain its sustainability on the subject of biocompatibility. during the polysulfone-based membrane development, several parameters should be considered to improve the membrane performances, such as excellent biocompatibility, appropriate ultrafiltration rate, and effective clearance of the t...

Cataract is one of the most common and visually debilitating complications of pediatric uveitis. It develops as a consequence of chronic inflammation and steroid use and is seen most often in juvenile idiopathic arthritis (JIA)-associated uveitis. Cataract extraction with intraocular lens (IOL) insertion has been carried out with a measure of success in non-uveitic pediatric eyes, but in cases ...

in this research, process asymmetric polyetherimide hollow fiber membranes using ethanol (0, 2 and 4 wt%) as non-solvent additive in the polymer dope via phase inversion method were fabricated. aqueous solution of 1-methyl-2-pyrrolidine (nmp) (90%) was applied as a bore fluid to avoid inner skin layer formation and water was used as the external coagulant. the morphology of fabricated membranes...

carbon molecular sieve membranes (cmsms) have been considered as very promising candidates for gas separation, in terms of separation properties as well as thermal and chemical stability. due to the numerous advantages and wide applications of carbon membranes, their application for gas separation is of special importance. because of the importance of carbon membranes and a large number of stud...

in this work, novel thin film composite membranes (tfcs) of poly (ether-6-block amide) (pebax-1657) on a polyvinyl chloride (pvc) ultrafiltration membrane as support were prepared using inclined coating method for co2 separation. investigating the effects of top selective layer thickness formed by controlling the coating angle (15-60°) and polymer solution concentration (5-10 wt.%), and also, t...

results the mean kt/v was 1.27 ± 0.28 in high-flux and 1.10 ± 0.32 in low-flux membrane which, these differences were statistically significant (p = 0.017). the mean of urr was 0.65 ± 0.09 in high-flux and 0.61 ± 0.14 in low-flux membrane, which these differences were not statistically significant (p = 0.221). patients and methods forty hemodialysis patients participated in this cross-over clin...

heterogeneous proton exchange membranes (pem) are synthesized using the dry phase inversion technique. the casting solutions are prepared by dispersing a finely ground cation exchange resin particle in n,n-dimethylacetamide (dmac) solution of polyvinyl-chloride (pvc). results show that ion exchange capacity is increased with the addition of 1 %-wt nanosilica (from 0.14 to 0.27 meq/g) while it i...

in this work a new resistance model has been presented based on that of henis-tripodi which can be used for interpretation of gas permeation data in composite and asymmetric membranes. in contrast to the previous works, in this model the fraction of the support layer surface that includes the pores filled with coating material has been taken into account. the influences of the filled pores on s...