Electro chemical machining is a non conventional machining process to machine conducting hard materials using anodic dissolution. The process parameters are needed to be optimized to get better result of material removal rate (MRR) and surface roughness (SR). In this paper MRR and SR values are optimized by Simulated Annealing (SA) and the effect of input parameters are determined by Taguchi De...

Electrical discharge machining (EDM) is a wellestablished non-conventional machining process, used for manufacturing geometrically complex or hard and electrically conductive material parts that are extremely difficult to cut by other conventional machining processes. But sometimes poor surface finish and low volumetric material removal rate limits its use in the industry. To diffuse this probl...

Fibre reinforced plastic composite materials are difficult to machine because of the anisotropy and inhomogeneity characterizing their microstructure and the abrasiveness of their reinforcement components. During machining, very rapid cutting tool wear development is experienced, and surface integrity damage is often produced in the machined parts. An accurate selection of the proper tool and m...

Electric Discharge Machining is a non-conventional machining process, used to machining difficult to machine materials. The major problem faced while doing EDM is high tool wear rate, end wear, corner wear , surface roughness and low material removal rate,. In this research work experimental investigations have been made to find the machining characteristics of high density ultra fine graphite ...

The aim of this research work is to evaluate the effects of coolant including nano- powder material for the cooling purpose in milling process and comparing the results with the conventional coolant. Generation heat and weak heat transfer reduces the tool life and also deteriorate surface roughness during milling operation. To overcome this problem, it is necessary to use coolant for cooling as...

Metal matrix composites (MMCs) are now gaining their usage in aerospace, automotive and biomedical industries because of their inherent properties like high strength to weight ratio, low wear rate etc. To machine these types of materials conventional machining methods are unsuitable because of high tool wear and tooling cost. Electro discharge Machining (EDM) is one of the important nontraditio...

Nowadays, High Speed Machining (HSM) is usually used for production of hardened material parts with complex shapes such as dies and moulds. In such parts, toolpaths generated for bottom machining feature with the conventional parallel plane strategy induced many feed rate reductions especially when boundaries of the feature have a lot of curvatures and are not parallel. Several machining experi...

Present manufacturing industries are facing challenges from these advanced materials viz. super alloys, ceramics, and composites, that are hard and difficult to machine, requiring high precision, surface quality which increases machining cost. To meet these challenges, non-conventional machining processes are being employed to achieve higher metal removal rate, better surface finish and greater...