Poly(glycolic acid) (PGA) fibers are a good candidate material for nerve cell scaffolds, which is applicable to the treatment of peripheral nerve injuries. Polylysine is widely used as a coating material for cell substrates to promote nerve cell adhesion. In this study, linear and dendrigraft polylysines were used to coat PGA fibers. The association of large dendrigraft polylysines with PGA fib...

Until about 1950, sugar coating was the first choice as coating agent for pharmaceutical preparation and much time & efforts were spent in perfecting the sugar coating techniques. Nobody ever was concerned about the problems like material cost, toxic effect due to coating or pollution etc. because the solvent used was always water. However, sugar coating technique was time consuming, affecting ...

An X-ray diffraction technique was used to measure the residual stress in the surface of a specimen containing a coating of a NijAl intermetallic compound produced bythe SHS (Self-propagation High temperature Synthesis) method. The Ni3Al was using the coating material for spherical carbon cast iron substrate and austenite stainless steel substrate. Differences between the coefftcient of thermal...

Titanium is a key biomedical material due to its good biocompatibility, mechanical properties and corrosion stability, but infections at the implantation site still pose a serious threat. One approach to prevent infection is to improve the antimicrobial ability of the coating material. Silver-doped hydroxyapatite (Ag/HAP) nanoparticles were synthesized by a new modified precipitation method. Th...

In this paper, a novel method of partial coating to reduce the Radar Cross Section (RCS) of a complex shaped perfectly electrically conducting (PEC) aircraft, of electrically large size, is proposed. The physical optics (PO) method is used to identify the hot spots of the PEC aircraft. An empirical procedure is then proposed to coat partial contiguous areas with Radar Absorbent Material (RAM). ...

a plain strain analysis of frictional rolling contact on an elastic graded coating is presented in this paper. finite element method is applied to gain an understanding of the stresses and contact zone properties caused during rolling contact. the effects of friction, material stiffness ratio and coating thickness on stresses in contact zone and coating/substrate interface are studied. shear mo...

Future gravitational wave detectors (GWDs) such as Advanced LIGO upgrades and the Einstein Telescope are planned to operate at cryogenic temperatures using crystalline silicon (cSi) test-mass mirrors at an operation wavelength of 1550 nm. The reduction in temperature in principle provides a direct reduction in coating thermal noise, but the presently used coating stacks which are composed of si...

BACKGROUND As endovascular stents are altered to add functionality, eg, by adding radiopaque coatings, biocompatibility may suffer. METHODS AND RESULTS We examined the vascular response in porcine coronary arteries to stainless steel gold-coated NIR stents (7-cell, Medinol, Inc). Stents, 9 and 16 mm in length, were left bare or coated with a 7-microm layer of gold. Physical and material effec...

This study investigated the deformation effects of the interface between conventionally produced stainless steel X2crNi 19 11 and HIPed NiTI coating (Hot Isostatic Pressed). Near-equiatomic nickel-titanium alloy (NiTi) has many attractive material properties, such as pseudo-elasticity and shape memory effects, which result into beneficial engineering properties e.g. as cavitation resistant coat...