vanadium phosphorus oxides (vpo) has been applied as a heterogeneous catalyst in gas phase oxidation reactions and its application is very limited in liquid phase. in this study a series of cobalt-doped vanadium phosphorus oxides (vpo-co) catalysts with different loading of co (0.01-1.0 mol ratio of co/v) were prepared. oxidation of benzyl alcohol was studied in the liquid phase over vpo and vp...

a series of x(co, mn)/tio2 catalysts (x=2–12wt.%) containing 25%co and 75%mn were prepared by the co-impregnation method. all prepared catalysts have been tested in fischer-tropsch synthesis for production of c2-c4 olefins. it was found that the catalyst containing 8wt.%(co,mn)/tio2 is an optimal catalyst for production of c2-c4 olefins. the effect of operation conditions such as the h2/co mola...

Nano-structure of Co–Mn spinel oxide was prepared by thermal decomposition method using [Co(NH3)4CO3]MnO4 as the precursor. The properties of the synthesized material were characterized by X-Ray Diffraction (XRD), Brunauer-Emmett-Teller (BET), Transmission Electron Microscopy (TEM), surface area measurements, Energy-Dispersive X-ray (EDX) spectroscopy analys...

Carbon-encapsulated cobalt (Co@C) nanoparticles, with a tunable structure, were synthesized by chemical vapor deposition using Co nanoparticles as the catalyst and supported on a water-soluble substrate (sodium chloride), which was easily removed by washing and centrifugation. The influences of growth temperature and time on the structure and magnetic properties of the Co@C nanoparticles were s...

CO oxidation over polycrystalline ruthenium dioxide was monitored in an in-situ XRD setup. The evolution of the bulk state of the catalyst was followed by in-situ XRD during reaction, while the surface morphology and chemical state before and after reaction were investigated by HRSEM and EDX. The commercial RuO2 powder was calcined prior reaction to ensure the formation of completely oxidized R...

A systematic study was conducted to understand the influences of catalyst combination as Ni-Co NPs on carbon nanotubes (CNTs) grown by Chemical Vapor Deposition (TCVD). The DC-sputtering system was used to prepare Co and Ni-Co thin films on silicon substrate. Ni- Co nanoparticles were used as metal catalyst for growing carbon nanotubes from acetylene (C2H2) gas in 850 ̊ C during 15 min. Carb...

The growth of vertically aligned carbon nanotubes using a direct current plasma enhanced chemical vapor deposition system is reported. The growth properties are studied as a function of the Ni catalyst layer thickness, bias voltage, deposition temperature, C2H2:NH3 ratio, and pressure. It was found that the diameter, growth rate, and areal density of the nanotubes are controlled by the initial ...

The CO sensing properties of a micro thermoelectric gas sensor (micro-TGS) with a double AuPtPd/SnO₂ and Pt/α-Al₂O₃ catalyst were investigated. While several nanometer sized Pt and Pd particles were uniformly dispersed on SnO₂, the Au particles were aggregated as particles measuring >10 nm in diameter. In situ diffuse reflectance Fourier transform Infrared spectroscopy (DRIFT) analysis of the c...

Monometallic and bimetallic Ni and Co catalytic nanoparticles supported on Titanium dioxide (rutile phase) substrate were prepared by wet impregnation method. These nanoparicles were used as catalysts for synthesis of multiwalled carbon nanotubes (MWCNTs) from acetylene decomposition at 700°C by the catalytic chemical vapor deposition (CCVD) technique. The nanomaterials (catalyst and CNTs) were...

The solid catalyst with high catalytic activity and enantioselectivity in the hydrolytic kinetic resolution (HKR) of epoxides was prepared by confining Co(Salen) in the nanocage of SBA-16 through reducing the pore entrance size using a silylation method. It was found that the activity of the solid catalysts increased with the number of [Co(Salen)] molecules per nanocage increasing, and the soli...