Split-protein systems have emerged as a powerful tool for detecting biomolecular interactions and reporting biological reactions. However, reliable methods for identifying viable split sites are still unavailable. In this study, we demonstrated the feasibility that valid circular permutation (CP) sites in proteins have the potential to act as split sites and that CP prediction can be used to se...

SUMMARY Isotropic etching of silicon in HF based solutions is expected to be controlled by the diffusion of fluorine to the silicon surface. In order to gain quantitative understanding of the process we studied etching of Si in HF/HNO 3 /H 2 O via circular mask openings and compared the results with the theoretical expectations. The cavity edges due to etching under the mask were analyzed with ...

In this research attempts were made to estimate the in-situ stresses acting on a hydrocarbon reservoir based on routine activities of acid injection in oil reservoir. It was found that the relation between the re-opening pressure of fracture and principal in-situ stresses can be estimated using rock mechanics equations for the circular underground cavities. An appropriate relation between the m...

In this work, the interaction between the semi-circular space and the neighboring joint with and without the presence of rock bolts was investigated using the particle flow code (PFC) approach. For this purpose, firstly, the calibration of PFC was performed using both the Brazilian experimental test and the uniaxial compression test. Secondly, a numerical model with the dimension of 100 m...

In this paper, the effect of elliptical shape openings was numerically compared to the case when circular openings were used in the steel panel shear walls. At first, the finite element model in ABAQUS was calibrated by experimental results, obtained from previous studies. Then, three steel shear panels with different sizes of elliptical openings were analyzed under cyclic loads, and the result...

Delamination is one of the most common failure modes in composite structures. In the case of in-plane compressional loading, delamination of a layered flat structure can cause a local buckling in delaminated area which subsequently affects the overall stiffness of the initial structure. This leads to an early failure of the overall structure. Moreover, with an increase in load, the delaminated ...