preparation of 2-chlorobenzonitrile, and benzonitrile are reported here from the corresponding 2-chlorobenzaldehyde and benzaldehyde by the reaction of ammonium hydroxide/vpo titania, vpo bulk (ammonium metavanadate) cucr catalyst/air system in methanol. all these catalysts showed better conversions with reasonable selectivity to aromatic. the results prove that bet surface area results show vp...

The possibility of optimizing the composition and the structures of the nickel catalysts and the pretreatment and reaction conditions for carbon dioxide reforming with methane is investigated. The optimum catalyst and the pretreatment and reaction conditions are determined employing the orthogonal and uniform design methods. The optimum nickel catalyst gives promising catalytic performance in t...

This study explores the potential of titanium oxide impregnated on calcium oxide (CaO-TiO2) as catalyst in transesterification of vegetable palm oil (VPO) to produce biodiesel. The biodiesel yield increased with catalyst calcination temperature and reaction time, and the usage of CaO-TiO2 led to higher biodiesel production when compared to reaction catalyzed by CaO. Biodiesel yield of 93.33% wa...

In this study, silica nanoparticles were used as support to prepare a new heterogeneous catalyst system for application in organic reactions. The reaction of silica nanoparticles with sodium 2-bromoethane-1-sulfonate resulted in the connection of a sulfonic acid group on the surface of silica nanoparticles (NSESA). The synthetic catalyst system was characterized using different microscopic and ...

We have developed a microfluidic "click chip" incorporating an immobilized Cu(I) catalyst for click reactions. The microfluidic device was fabricated from polydimethylsiloxane (PDMS) bonded to glass and featured ~14,400 posts on the surface to improve catalyst immobilization. This design increased the immobilization efficiency and reduces the reagents' diffusion time to active catalyst site. Th...

Synthesize carbon-based metal-free catalysts and • carbon-composite catalysts for oxygen reduction reaction (ORR). Optimize catalytic active reaction sites as a function • of carbon support, surface oxygen groups, nitrogen content, surface modifiers, pyrolysis temperature, porosity, and the concentration of the non-metallic additive “X” in the catalyst matrix. Evaluate catalyst stability under ...

V2O5/SiO2 catalyst was utilized to oxidize SO2 to SO3 species in the presence of oxygen mainly for producing sulfuric acid. For this catalyst, the active phase was a mixture of vanadium pentoxide and basic sulfate/pyrosulfate material. This active phase at the reaction temperature behaved as a liquid filling up the pores of the silica support. On the other hand, amounts of the SO3 and V5+ speci...

Aiming at a detailed understanding of the role of metal−support interactions in the selective methanation of CO in CO2-rich reformate gases, we have investigated the catalytic performance of a set of Ru/TiO2 catalysts with comparable Ru loading, Ru particle size, and TiO2 phase composition but very different surface areas (ranging from 20 to 235 m g−1) in this reaction. The activity for CO meth...

full factorial experimental design (23) for the evaluation of slurry ethylene polymerization in the presence of an industrial ticl4/mgcl2 ziegler-natta catalyst was employed. the following parameters were used as independentvariables: al/ti molar ratio, reaction temperature and hydrogen partial pressure. the total polymerization pressure was 9 bar. catalyst activity, mfi (melt flow index) and m...

In this paper, conventional SAPO-34 and Cerium Hierarchical SAPO-34 zeolites are synthesized using a hydrothermal method for methanol-to-propylene (MTP) reaction. The Ce-H-SAPO-34 catalyst shows a slightly larger crystal size, bimodal pore size distribution (microporous and mesoporous) and lower surface acidity compared to conventional SAPO-34 catalysts. According to these physicochemical prope...