A cam driving a lumped inertia through a massless, elastic, slider-crank fol­ lower linkage with two concentrated masses located at the pin joints is considered. An iterative procedure taking the elasticity, damping, and changing geometry of the linkage into account is developed for synthesizing the cam profile to produce a desired output motion at a given design speed. The steady state solutio...

PURPOSE We investigate the dependence of the kinematics of the human knee on its anatomy. The idea of describing the kinematics of the knee in the sagittal plane using four-bar linkage is almost as old as kinematics as an independent discipline. We start with a comparison of known four-bar linkage constructions. We then focus on the model by H. Nägerl which is applicable under form closure. M...

disk plows are one of the most important tillage tools. two way (reversible) disk plows can perform continues plowing. so they can save time and costs and hence improve overall efficiency. in this study, a “two-way” disk plow was designed based on a λ-formed straight-line, four-bar linkage (daniel mechanism). this design contains disk and rear wheel reversing mechanism, stabilization mechanism ...

In this paper, some definitions and traditional formulas for calculating the mobility of mechanisms are represented, e.g. Grubler formula, Somov - Malyshev formula, and Buchsbaum - Freudenstei. It is discussed that there are certain cases in which they are too ambiguous and incorrect to use. However, a matrix method is suggested based on the rank of the Jacobian of the mechanism and its applica...

Gasoline direct injection provides reduced engine emissions, increased power, and increased fuel economy as compared to port fuel injection (PFI). Reduced emissions are largely due to starting the engine using high fuel pressure (up to 150 bar) and injecting into the compression stroke. During a cold start, fuel pressure must be increased from lift pump pressure (typically 4 to 6 bar) to desire...

This paper concentrates on the application of fuzzy logic based on Taguchi method (FLTM) for multiobjective optimization of the small-length flexural pivot (belongs to link 4) in partially four bar-compliant mechanisms. The input parameters such as the input torque and the crank angle of link 2 were optimized with considerations of the multiple performance measures as angular displacement and s...