In this research, tribological characteristics of Ni-P electroless coating and double-layered Ni-P/Ni-B electroless coating were studied. For this purpose, Ni-P electroless coating with 25 μm thickness was initially applied to the surface of steel Ck45 samples; then, a double-layered Ni-P/Ni-B electroless coating, including inner layer of Ni-P with 15 μm thickness and outer layer of Ni-B with 1...

despite having some useful properties, stainless steels suffer from lack of suitable surface hardness. in this research electroless ni-b-tl coating was used with the aim to increase their surface hardness. the effects of nickel chloride, sodium borohydride, thallium nitrate and ethylendiamin on the chemical composition of coating were studied. to achieve an increase in hardness, the effects of ...

Boron carbide (B4C) has been studied under dry sliding conditions for use as a potential finite-life run-in coating. Such a coating has been found to polish its mating surface during dry sliding wear, thereby providing fatigue resistance to the coated part. Employing such run-in coatings requires a complete understanding of the changes that occur in the coating abrasiveness during the polishing...

A boron carbide coating was applied to diamond particles by heating the particles in a powder mixture consisting of H3BO3, B and Mg. The composition, bond state and coverage fraction of the boron carbide coating on the diamond particles were investigated. The boron carbide coating prefers to grow on the diamond (100) surface than on the diamond (111) surface. A stoichiometric B4C coating comple...

in the past 30 years, electroless nickel (en) plating has grown to such proportions that these coatingsand their applications are now found underground, in outer space, and in a myriad of areas inbetween. moreover, in order to further improve the mechanical and tribological properties of thenickel-phosphorous (ni-p) coatings, ni-p/ptfe composite coatings can be obtained, which provideseven grea...

The nickel-manganese (Ni-Mn) alloy coating prepared from DC electrodeposition process in sulphamate bath was studied. The effects of process parameters, such as current density and electrolyte composition, on the cathodic current efficiency, microstructure, internal stress and mechanical properties were investigated. Because of its crucial effect on the application to the electroforming of micr...

The aim of this study is to investigate the microstructure and wear properties nickel (Ni) matrix boron carbide (B4C) carbon nanofiber (CNF)-reinforced composite materials. Microstructure phase composition composites manufactured by powder metallurgy (PM) method were determined SEM-EDS XRD analysis. While hardness values Vickers measurement method, their using pin-on-disc method. SEM images sho...

The use of magnesium alloys is limited due to their susceptibility to corrosion although they have many attractive physical and mechanical properties. To increase mechanical and corrosion properties of these alloys, many deposition method and coating types are used. Electroless Ni–B coatings have received considerable interest recently due to its unique properties such as cost-effectiveness, th...

Ni-Fe/Si3N4 nanocomposite coatings with various ratio of Si3N4 to Na-saccharine were prepared by electrodeposition technique. The effect of Si3N4 nanoparticulates in the Ni-Fe nanocomposite coatings was investigated in relation to the ratio of Si3N4 to Na-saccharine in the plating bath. X-ray diffraction analysis showed that the Ni-Fe nanocomposite coating has face center cubic structure (FCC)....