This paper deals with an analytical approach to predict the nonlinear buckling behavior of functionally graded graphene-reinforced composite laminated cylindrical shells under axial compressive load surrounded by Pasternak’s elastic foundation in a thermal environment. Piece-wise functionally graded graphene-reinforced, composite layers are sorted with different types of graphene distribution. ...

composite concrete-steel plate shear walls are the most critical resisting structural members that resist lateral and axial loads. This type of wall consisting of two steel faceplates presenting the outer skin, infill concrete and shear connectors which are used to provide the composite action of the steel faceplates with infill concrete in order to increase the strength and to reduce the local...

The present study utilizes an analytical method to formulate the three lowest modal frequencies of axially-loaded notched beam through both crack location and load level in a specific format that can be used in existing frequency-based crack-identification methods. The proposed formula provides a basis to shift into two states, one with axial loading and the other without any loading whatsoever...

Fins incorporated into the design of a dynamic cervical spine implant have been employed to enhance axial load- bearing ability, yet their true biomechanical advantages, if any, have not been defined. Therefore, the goal of this study was to assess the biomechanical and axial load-bearing contributions of the fin components of the DOC ventral cervical stabilization system. Eighteen fresh cadave...

this paper investigates axial compression process of multi-layered tubes with circular cross-section under the axial loading in the quasi-static condition using experimental method. some specimens are prepared in seven different groups, namely; empty carbon/epoxy composite tubes, solid carbon/epoxy composite rods, empty copper tubes, composite tubes with silicon sealant filler, concentrically s...

Sudden application of load along a sagittal or coronal axis has been used to study trunk stiffness, but not axial (vertical) load. This study introduces a new method for sudden-release axial load perturbation. Prima facie validity was supported by comparison with standard mechanical systems. We report the response of the human body to axial perturbation in sitting and standing and within-day re...

Buckling strength of composite latticed cylindrical shells is one of the important parameters for studying the failure of these structures. In this paper, new governing differential equations are derived for latticed cylindrical shells and their critical buckling axial loads. The nested structure under compressive axial buckling load was analyzed. Finite Element Method (FEM) was applied to mode...

this paper describes experimental and numerical investigations on two specimens of frames composed of steel reinforced concrete beam and angle-steel concrete column under horizontal low cyclic loading. based on the test results, the relationship curves of the horizontal load-displacement and the failure modes are acquired. meanwhile the hysteretic behaviors, skeleton curves, stiffness degradati...

the use of bio-ethanol as an alternative diesel engine fuel is rapidly increasing. bio-ethanol is mixed with diesel fuel at different ratios and used in ci and si engines. since vibrations have direct effects on users and engine components, for this reason analysis of vibration resulting from combustion in ci engines is very important. in this study, evaluation of vibration was performed for bo...

methods are proposed to develop idealized moment-curvature response curves of slender rectangular rc wall sections with uniformly distributed longitudinal reinforcement, using limit states, namely, cracking of concrete in tension, tensile yielding of reinforcement layers, and compression failure of concrete. it is recommended that tensile yielding of an inner layer of reinforcement is considere...