zno and zro2 photo catalysts were synthesized by sol-gel auto combustion method. the products were characterized by x-ray diffraction (xrd) and scanning electron microscopy (sem). structural and morphological properties of nano particles were investigated and the average crystalline size of zno and zro2 was obtained 44 and 51 nm, respectively. also, photo catalytic degradation of nitro phenol f...

A large eddy simulation (LES) model was developed to simulate the combustion process in a spark-assisted homogeneous charge compression ignition (SACI) engine. First, an ignition and flame propagation model based on a reaction progress variable is presented. The reaction progress variable is defined based on the normalized cumulative heat release. Transport equation for the progress variable is...

In this paper, strontium ferrite (SrO.6Fe2O3) was synthesized by the sol-gel auto-combustion process. The thermal behavior of powder obtained from self-propagating combustion of initial gel was evaluated by simultaneous differential thermal analysis (DTA) and thermo gravimetric (TG), from room temperature to 1200°C. The as-burnt powder was calcined at various temperatures from 700-900°C to achi...

Homogeneous charge compression ignition (HCCI) seems to be the most promising solution for gasoline engines in the light of future emissions regulations. This novel combustion technique allows for significant reduction of fuel consumption and engine-out NOX emissions at low and medium engine load/speed conditions. High heat release rate enables realization of the Otto cycle close to ideal, incr...

Nanocrystalline complex oxides have been synthesized by combination of sol–gel auto combustion and ultrasonic irradiation techniques using copper nitrate, zinc nitrate as metallic nitrates and glycine, urea and thiourea as fuels. Sol-gel combustion (combination of the chemical sol–gel process and the combustion process) as a proper synthesized technique is used to synthesize ZnO/CuO nanocomposi...

Sol–gel auto-combustion is a unique combination of the combustion and the chemical gelation processes. In this work, nanosize (d) powders with compositions of ZnFe2O4 were synthesized by sol–gel combustion method. The puffy, porous brown powders as-combusted was calcined at the temperature of 750–1000◦C for 4 h. These powders are characterized by X-ray diffraction and scanning electron microsco...

Nanocrystalline complex oxides have been synthesized by combination of sol–gel auto combustion and ultrasonic irradiation techniques using copper nitrate, zinc nitrate as metallic nitrates and glycine, urea and thiourea as fuels. Sol-gel combustion (combination of the chemical sol–gel process and the combustion process) as a proper synthesized technique is used to synthesize ZnO/CuO nanocomposi...

The Homogeneous Charge Compression Ignition (HCCI) combustion concept lacks direct ignition timing control, instead the auto ignition depends on the operating condition. Since auto ignition of a homogeneous mixture is very sensitive to operating conditions, a fast combustion timing control is necessary for reliable operation. Hence, feedback is needed and the crank angle of 50% burnt (CA50) has...

A versatile one-pot auto-combustion method for the synthesis of powders of iron-doped strontium titanate, SrTi1-xFexO3-δ, has been developed. The synthesis is optimised by the combined use of EDTA and citric acid as chelating agents, and an appropriate balance between fuel and oxidising elements in the reaction mixture. The method produces immediately an almost phase-pure perovskite oxide powde...

The composite powders of barium-magnesium ferrite were prepared using sol-gel auto-combustion and microwave methods. The crystal structure and the shape of nanocomposites have been compared. X-ray Diffraction (XRD), Scanning Electron Microscope (SEM) and Vibrating Sample Magnetometer (VSM) were used to investigate the structural, morphological and magnetic properties of nanopowder. The formatio...