نتایج جستجو برای: alumina zirconia mullite

تعداد نتایج: 17918  

2004
Adam J. Monkowski Glenn E. Beltz

A strategy is proposed to reduce surface tensile stresses that develop in ceramic microlaminate structures. As a specific example, surface stresses, which can lead to unwanted edge cracking, appear within a thin alumina/mullite layer bounded by thicker alumina layers after fabrication at some elevated temperature and subsequent cooling. A stress analysis is performed using the finite element me...

2006
X. Yang R. E. Jentoft F. C. Jentoft

Supported sulfated zirconia catalysts with zirconia contents of 10, 20 and 50 wt% were prepared by impregnation of SiO2 and γ-Al2O3 supports with H2SO4/Zr(SO4)2 solutions followed by calcination at 923 K. The catalysts were characterized by X-ray diffraction, extended X-ray absorption fine structure measurements, thermal analysis, UV–vis spectroscopy, and electron microscopy. Tetragonal zirconi...

Journal: :Journal of The European Ceramic Society 2021

Refractory castables are utilized in hazardous environments and thus their reliability should be accurately evaluated to avoid incidents. This work aims measure the fracture energy of a high-alumina refractory with mullite-zirconia aggregates at 600 °C. Wedge Splitting Tests were performed on 5 samples different sintering temperatures. Images acquired analyzed via Digital Image Correlation (DIC...

2007
Haksung Moon Je-Hyeong Bahk Fred F. Lange

We dedicate this work to Wolfgang Pompe, a very good friend and a good friend of the Materials Faculty at UCSB where he and his wife, Gisela, shared their lives and fellowship. Three different zirconia–alumina laminates, AZ50, AZ80, and AZ95, were fabricated via tape-casting thick Zr(3Y)O2 layers, dip-coating the zirconia tapes in a slurry containing a mixture of zirconia and alumina, stacking ...

2015
Chrystalleni Hadjicharalambous Oleg Prymak Kateryna Loza Ales Buyakov Sergei Kulkov Maria Chatzinikolaidou

It is acknowledged that cellular responses are highly affected by biomaterial porosity. The investigation of this effect is important for the development of implanted biomaterials that integrate with bone tissue. Zirconia and alumina ceramics exhibit outstanding mechanical properties and are among the most popular implant materials used in orthopedics, but few data exist regarding the effect of...

Journal: :Dental materials journal 2006
Yukiko Tsuo Keiichi Yoshida Mitsuru Atsuta

This study evaluated the effect of alumina-blasting and three commercial adhesive primers on the shear bond strength of a dual-cured resin luting agent to zirconia ceramics. Two different-sized zirconia ceramic specimens were treated with or without alumina-blasting and then treated with one of three adhesive primers. Subsequently, specimens were cemented together with Linkmax HV (GC). Half of ...

Journal: :The Journal of bone and joint surgery. British volume 2003
P Hernigou T Bahrami

Although alumina has been used in orthopaedic surgery since the 1970s, the long-term clinical results of zirconia have not been well documented in vivo. We studied hips with these two different ceramics during the same period and with a minimum follow-up of ten years. Because the size of the alumina and zirconia heads was different, hips with 32 mm alumina heads and those with 28 mm zirconia he...

2017
Christian Sallé Frédérique Ferey Philippe Grosseau Bernard Guilhot Philibert Iacconi Mourad Benabdesselam Gilbert Fantozzi C. Sallé F. Ferey P. Grosseau B. Guilhot P. Iacconi M. Benabdesselam G. Fantozzi

The thermoluminescence (TL) after excitation by UV or X-rays radiation of doped α-alumina powders is investigated. In the case of zirconia, the alumina-zirconia composites present five of the characteristic peaks of zirconia at –170, –145, –90, 0 and 95°C. After a thermal treatment of mixed oxides, a new peak is observed at –35°C in TL. This peak reveals the presence of stabilized tetragonal zi...

2012
Raquel Osorio Raquel Castillo-de Oyagüe Francesca Monticelli Estrella Osorio Manuel Toledano

OBJECTIVE To evaluate the bond stability of resin cements when luted to glass-reinforced alumina and zirconia CAD/CAM dental ceramics. STUDY DESIGN Eighteen glass-infiltrated alumina and eighteen densely sintered zirconia blocks were randomly conditioned as follows: Group 1: No treatment; Group 2: Sandblasting (125 µm Al₂O₃-particles); and Group 3: Silica-coating (50 µm silica-modified Al₂O₃-...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید