The detailed quantitative characterization of soft-tissue in-growth into highly porous artificial implants is critical to understanding the biophysical processes that will lead to the best structural scaffolding construct. Previous studies have performed mechanical peel tests and mostly qualitative histological analyses of soft-tissue. The goal of this paper is to report the results obtained fr...

Mesoporous Ni–alumina catalysts (Ni–alumina-pre and Ni–alumina-post) were synthesized by one-step sol–gel method using micelle complex comprising lauric acid and nickel ion as a template with metal source and using aluminum sec-butoxide as an aluminum source. The Ni–alumina catalysts showed relatively high surface areas (303 m/g for Ni–alumina-pre and 331 m/g for Ni–alumina-post) and narrow por...

Foam injection is becoming a standard conditioning agent when tunnelling with an earth-pressure balanced shield, resulting in an increasing interest in this technique. The technique is mostly based on empirical rules and experience. To be able to determine what foam and how may foam has to be injected for different soils, it is necessary to know the mechanical parameters of the foam-water-soil ...

PURPOSE The purpose of the present study was to evaluate the flexural strength of the joint between glass-infiltrated alumina frames and the experimental adjusting agent (MA modifier) that contains alumina and magnesia. METHODS A commercially available adjusting agent (Optimizer), a slurry of alumina powder (Alumina modifier), and a bulk specimen (joint-free alumina) were used as controls. Be...

Application of foam in EOR, increases macroscopic sweep efficiency via awesome increscent of mobility control. Macroscopic manifestation of foam application performance in porous media is complex process that involves several interacting microscopic foam events. Stability as an important factor in foam injection within large reservoirs, depends on several variables including oil saturation, con...

in the present investigation surface modification of silica nanoparticles by alumina was carried out by sol-gel process. fourier transform infrared (ftir) and x-ray fluorescence (xrf) confirmed the synthesis of silica and the surface modification as alumina is anchored to silica surface. field emission scanning electron microscopy (fesem) and transmission electron microscopy (tem) investigation...

aluminum foams are a novel branch of advanced materials with superior properties. sandwich structures with aluminum foam core are good energy absorbers. in this paper, mechanical properties and energy absorption of aluminum foam sandwich panels subjected to quasi-static perforation tests with conical-nosed indenter were investigated experimentally. for this purpose sandwich panels consisting of...

Porous alumina films had been fabricated by anodizing from aluminum films after an electropolishing procedure. Alumina stripes without pores can be distinguished on the surface of the porous alumina films. The width of the alumina stripes increases proportionally with the anodizing voltage. And the pores tend to be initiated close to the alumina stripes. These phenomena can be ascribed to the e...

the brass tubes with foam cores of alsi7sic3, alsi7sic3fe1 and alsi7sic3fe3 were produced as the crush-boxes with circle and square cross-section. then axial compressive behavior and energy absorption capability of the foam-filled tubes were investigated during the quasi-static progressive plastic buckling. the uniaxial compressive stress–strain curves of the foam-filled brass tubes exhibited t...

foam injection is widely applied in amounts of fields to drilling, production, and formation protection. sometimes, the application result is disappointing, which is caused by the failure of bubble generation in foam flooding. therefore, it is necessary to seek ways for improving the performance of foam injection. an increased disturbance to the stratum, like the vibration caused by a seismic o...