Nowadays, fly-wire is only used for flying-related things. All plane controls depend on electronics, but they also must deal with high-intensity radiated fields. This equipment might need an electromagnetic shield to protect it from outside pollution. The current work aims develop a mesh around the operating and make better. AL6061 was create metal matrix composite. Here three combinations of M...

In the present study the effect of phase volume fraction on the reinforcement of microstructure and tensile properties of composite extrusion process Al6061/SiC has been studied. For this purpose, the base alloy Al6061 using pure aluminum ingots, silicon, of Al-50% Mg, Al-10% Cr and a thin copper rod was prepared. Next, the composite Al6061/5% SiC, Al6061/10% SiC, Al6061/15% SiC and Al6061/20% ...

In this study, to evaluate the effect of boron carbide (B4C) addition on wear performance aluminum (Al), Al6061 and 5, 10, 20 vol.% B4C/Al6061 composites were manufactured using stir casting hot rolling processes. B4C particles randomly dispersed during process; then, arranged in direction a process further improve dispersion resistance composites. Furthermore, continuous interfacial layer betw...

Hot deformation behavior of a medium Cr/Mn Al6061 aluminum alloy was studied by isothermal compression test at temperatures range of 320 to 480 °C and strain rates range of 0.001 to 0.1 s −1. The true stresstrue strain curves were analyzed to characterize the flow stress of Al6061. Plastic behavior, as a function of both temperature and strain rate for Al6061, was also modeled using a hyperboli...

A method for measuring the real-time corrosion rates for Alloy 718, stainless steels (SS) 304L and 316L nuclear grade (NG), aluminum alloys 5052 (Al5052) and 6061 (Al6061), copper (Cu), tantalum (Ta), and tungsten (W) in two separate water systems that were irradiated by 800 MeV protons is presented. The ®rst water system was fabricated entirely of 304 SS, thoroughly cleaned before operation, a...

Abstract Experimental and theoretical studies are combined to investigate the phenomenon of macroscopic plastic deformation localization in metallic tensile specimens AL6061, HSLA350 Q235. The longitudinal strain cross-section reduction at different instant during testing estimated through measurement technique three dimensional digital image correlation (3D-DIC). Ling weighted-average method r...

A fuzzy-logic controller (FLC) is designed to automatically adjust feed rate in order to regulate the cutting force of milling processes in a vertical machining center. The FLC has a double-loop structure, consisting of the inner PD (proportional-derivative) velocity-control loop for a feed servo and the outer fuzzylogic force-control loop. Reference cutting forces are well maintained in both n...