Dynamic viscosity values for three particular water-based nanofluids have been experimental determined using a commercial ‘piston-type’ viscometer. Viscosity data, expressed as a function of temperature and particle volume fraction, are presented for 29nm particle-size CuO-water and Al2O3-water with 36nm and 47nm particle-sizes, temperatures up to 75°C and particle volume fraction up to 9%. In ...

The entropy generation based on the second law of thermodynamics is investigated for turbulent forced convection flow of ZrO2-water nanofluid through a square pipe with constant wall heat flux. Effects of different particle concentrations, inlet conditions and particle sizes on entropy generation of ZrO2-water nanofluid are studied. Contributions from frictional and thermal entropy generations ...

The CFD simulation of heat transfer characteristics of a nanofluid in a circular tube under constant heat flux was considered using Fluent software (version 6.3.26) in the laminar flow. Al2O3 nanoparticles in water with concentrations of 0.5%, 1.0%, 1.5%, 2% and 2.5% were used in this simulation. All of the thermo-physical properties of nanofluids were assumed to be temperature independent. Two...

In present work a experimental study based on thermosyphon is investigated using a solid nano-particles added to water as a working fluid. Tests are made on a thermosyphon. The experiment was performed in order to measure the temperature distribution and compare the heat transfer rate of the thermosyphon with the nano uid and with pure water. The tested concentration level of the nano-particles...

Thermal enhancement of a single mini channel in Proton Exchange Membrane Fuel Cell (PEMFC) cooling plate is numerically investigated. In this study, low concentration of Al2O3 in Water Ethylene Glycol mixtures is used as coolant in single channel of carbon graphite plate to mimic the mini channels in PEMFC cooling plate. A steady and incompressible flow with constant heat flux is assumed in the...

nanofluid is a new class of heat transfer fluids engineered by dispersing metallic or non-metallic nanoparticles with a typical size of less than 100 nm in the conventional heat transfer fluids.this article aims to investigate the overall and convection heat transfer coefficient and nusselt number of al2o3-water nanofluid flowing in a horizontal double pipe heat exchanger under turbulent flow (...

Eulerian-Eulerian multi-phase mixture model is applied to numerically analyse the turbulent flow and heat transfer behaviours of water based Al2O3 and TiO2 nanofluids in a pipe. The main goal of the present work is to investigate the effects of volume concentrations, Brownian motion and size diameter of nanoparticles on the flow and heat transfer. Analysis of entropy generation is presented in ...

In this paper, an experimental study has been conducted on the rheological behavior of Water (80%) and Ethylene-glycol (20%) in presence of Al2O3-MWCNTs hybrid nanomaterials. For this purpose, nanofluid samples were prepared by suspending the nanomaterials in a mixture of water and EG with solid volume fractions of 0.0625%, 0.125%, 0.25% and 0.5% Viscosity measurements were performed at various...

The thermal performances of a minichannel heat sink are experimentally investigated for cooling of electronics using nanofluid coolant instead of pure water. The Al2O3–H2O nanofluid including the volume fraction ranging from 0.10 to 0.25 vol.% was used as a coolant. The effects of different flow rates of the coolant on the overall thermal performances are also investigated. The flow rate was ra...

Nanofluid has great potentials in heat transfer enhancement and entropy generation decrease as an effective cooling medium. Effects of Al2O3-water nanofluid flow on entropy generation and heat transfer performance in a rectangular conventional channel are numerically investigated in this study. Four different volume fractions are considered and the boundary condition with a constant heat flux i...