introduction: the aim of this study was to assess shear bond strength of composite to dentin after air abrasion and laser treatment. methods: 40 human extracted molars divided into 4 groups (n=10) received the following treatments. group 1: carbide bur, group 2: air abrasion with aluminum oxide 50 μm, group 3: irradiated with erbium-doped yttrium aluminum garnet (er: yag) laser (150 mj/20hz), g...

statement of problem: in some clinical situations, repair of composite restorations is treatment of choice. improving the bond strength between one new and old composite usually requires increased surface roughness to promote mechanical interlocking since chemical bonding might not be adequate. similarly, the treatment of a laboratory fabricated resin composite restoration involves the same pro...

OBJECTIVE This study was intended to optimize perlite particle size and morphology for better tooth cleaning and lower tooth abrasion, and to evaluate the performance of a whitening toothpaste containing the optimized perlite abrasive for tooth cleaning, abrasion, and polishing. METHODS Perlite toothpaste abrasive samples were prepared by air classifying a commercial expanded perlite product....

AIM Aim of this experiment is the efficacy evaluation of three different types of surface preparation techniques by microleakage assessment of two different sealing materials. MATERIALS AND METHODS Sixty teeth were used for the experiment: half were treated with Admira seal (Voco) and the remaining half with Delton FS+ (Dentsply). Each group was then divided into three subgroups, which underw...

The aim of this study was to qualitatively demonstrate surface micro-morphological changes after the employment of different surface conditioning methods on high-alumina and glassy-matrix dental ceramics. Three disc-shaped high-alumina specimens (In-Ceram Alumina, INC) and 4 glassy-matrix ceramic specimens (Vitadur Alpha, V) (diameter: 5 mm and height: 5 mm) were manufactured. INC specimens wer...

AIM The aim of this in vitro study was to evaluate the shear bond strength of a one-step self-etch adhesive to dentin pretreated with phosphoric acid, air abrasion, or laser. METHODS AND MATERIALS Fifty-six extracted non-carious human mandibular molars were mounted and the occlusal surfaces ground with a mechanical grinder to obtain flat occlusal dentin surfaces. The teeth were randomly divid...

PURPOSE Although several surface treatments have been recently investigated both under in vitro and in vivo conditions, controversy still exists regarding the selection of the most appropriate zirconia surface pre-treatment. The purpose of this study was to evaluate the effect of alumina (Al) and aluminium nitride (AlN) coating on the shear bond strength of adhesive resin cement to zirconia cor...

OBJECTIVES The aims of this study were to test whether the bond strength of a hybrid composite and a PMMA-based veneer to CAD/CAM polymers would improve after pre-treatment and to evaluate the failure types after debonding. MATERIALS AND METHODS Three types of PMMA-based (CAD-Temp, artBloc Temp and TelioCAD) CAD/CAM blocks were obtained (N = 360, n = 15 per test group). They were divided into...

BACKGROUND The success of pit and fissure sealants is directly related to their retention. The purpose of this study was to assess and compare the retention of pit and fissure sealants placed using acid etch alone and a combination of air abrasion and acid etch techniques. MATERIAL AND METHODS 50 subjects aged 6-8 years were included in the study. Primary second molars and permanent first mol...