In this study, adsorption of ten environmentally halogenated aliphatic synthetic organic compounds (SOCs) by a pristine graphene nanosheet (GNS) and a reduced graphene oxide (rGO) was examined, and their adsorption behaviors were compared with those of a single-walled carbon nanotube (SWCNT) and a granular activated carbon (GAC). In addition, the impacts of background water components (i.e., na...

In the present work, the nano-NaX zeolite and micro-NaX zeolite were synthesized via hydrothermal method. Then, the adsorption capacities and isotherms of pure gases CO2 and CH4 on the synthesized zeolite nanoparticles were determined at three temperatures of 288, 298 and 308 K and various pressures from 1 up to 20 bar. Adsorption capacities of CO2 on the nano-sized zeolites NaX were showed to ...

Electrospun nanofiber membranes surface functionalized with 3D nanolayers through ATRP provide adsorption capacities over 50-times higher than current commercial membrane adsorption systems and over 12-times higher than packed bed resins; additionally, the adsorption kinetics remain 10-times faster than packed bed resins and have over 15-times higher permeance.

Ala~ntct--Tbe performance characteristics of two activated carbons and eight synthetic adsorbents are compared. The comparison addresses both the equilibrium capacities and mass transport properties of the adsorbents. A new empirical adsorption isotherm is employed for description of adsorption equilibrium data. A' predictive mathematical model is used for forecasting adsorption bed performance...

A series of superporous carboxymethylcellulose-graft-poly(acrylamide)/palygorskite (CMC-g-PAM/Pal) polymer monoliths presenting interconnected pore structure and excellent adsorption properties were prepared by one-step free-radical grafting polymerization reaction of CMC and acrylamide (AM) in the oil-in-water (O/W) Pickering-medium internal phase emulsions (Pickering-MIPEs) composed of non-to...

batch experiments were conducted to study the adsorption behaviors of lead ion (pb2+) onto ferrihydrites prepared using three different procedures which were characterized  by textural analysis (bet). the adsorption removal of pb2+ by the three ferrihydrites (called fh-1, fh-2 and fh-3, respectively) were compared, and fh-3 shows fast adsorption kinetics as well as high adsorption capacities, t...

Powdered activated carbon (PAC) prepared from Eucalyptus camaldulensis Dehn. bark was tested for its adsorption capacity for Cu(II) and Pb(II). The experiment was conducted to investigate the effects of pH, contact time, initial metal concentration, and temperature. The best adsorption of both Cu(II) and Pb(II) occurred at pH 5, where the adsorption reached equilibrium within 45 min for the who...

Oat and wheat straw are abundant yet at the same time are not widely used. For this reason they were tested as metal ion removers from water solutions. Batch experiments were done to determine the affinity of both biomasses for Cu(II), Pb(II), Cr(III), Cr(VI), Ni(II), Zn(II), and Cd(II) metal ions at several pHs; times of reaction and the adsorption capacity for each metal were determined under...

this study examined the adsorption behavior of two cationic dyes used in textile industries (cibasic red 46 and ci basic blue 3) on tunisian clay used in pottery. the ability of pottery clay to remove thebasic dyes from aqueous solution was compared to that of the commercial powdered activated carbon (pac)and raw clay. physicochemical characteristics of these adsorbents were performed by boehm ...

The aim of this study was to evaluate the adsorption capacity of the novel coated activated carbon by chitosan for removal of Cr (VI) and Cd (II) ions from single and bi-solute dilute aqueous solutions. In addition, the adsorption abilities of activated carbon (AC), chitosan (CH) and chitosan / activated carbon composite (CHAC) have been compared. Adsorption studies were performed in a batch sy...